Edit File: datafile.storable
pst0 #%#parent * munin graph_category update graph html limits graph_order yes graph_scale Munin processing time graph_title #%#parent , update_rate limits #%#name normal graph_data_size munin limits label AREASTACK draw limits , update_rate #%#parent munin html label html #%#name normal graph_data_size AREASTACK draw html --base 1000 -l 0 graph_args #%#parent #%#parent munin update label 285 critical , update_rate update #%#name normal graph_data_size 240 warning AREASTACK draw update #%#parent munin graph label 285 critical , update_rate normal graph_data_size graph #%#name AREASTACK draw 240 warning graph munin_stats #%#name seconds graph_vlabel iThis graph shows the run time of the four different processes making up a munin-master run. Munin-master is run from cron every 5 minutes and we want each of the programmes in munin-master to complete before the next instance starts. Especially munin-update and munin-graph are time consuming and their run time bears watching. If munin-update uses too long time to run please see the munin-update graph to determine which host is slowing it down. If munin-graph is running too slow you need to get clever (email the munin-users mailing list) unless you can buy a faster computer with better disks to run munin on. graph_info munin_stats Available entropy graph_title no graph_scale #%#parent system graph_category entropy graph_order --base 1000 -l 0 graph_args entropy #%#name entropy (bytes) graph_vlabel ?This graph shows the amount of entropy available in the system. graph_info entropy #%#name normal graph_data_size entropy label 6 #%#parent , update_rate [The number of random bytes available. This is typically used by cryptographic applications. info entropy entropy 400 graph_width LINE1 draw 0 min sda_wrio #%#name normal graph_data_size GAUGE type , update_rate sda_rdio negative sda label I #%#parent sda_wrio I #%#parent W #%#parent dummy label no graph 0 min LINE1 draw , update_rate GAUGE type normal graph_data_size rdio #%#name rdio --base 1000 graph_args Units read (-) / write (+) graph_vlabel sda #%#name �This graph shows the number of IO operations pr second and the average size of these requests. Lots of small requests should result in in lower throughput (separate graph) and higher service time (separate graph). Please note that starting with munin-node 2.0 the divisor for K is 1000 instead of 1024 which it was prior to 2.0 beta 3. This is because the base for this graph is 1000 not 1024. graph_info LINE1 draw 0 min , update_rate GAUGE type normal graph_data_size avgwrrqsz #%#name .Average Request Size in kilobytes (1000 based) info avgrdrqsz negative W #%#parent Req Size (KB) label avgwrrqsz IOs for /dev/sda graph_title 0 min LINE1 draw GAUGE type , update_rate normal graph_data_size wrio #%#name rdio negative W #%#parent IO/sec label wrio dummy label W #%#parent 0 min no graph LINE1 draw normal graph_data_size avgrdrqsz #%#name GAUGE type , update_rate avgrdrqsz rdio wrio avgrdrqsz avgwrrqsz graph_order disk graph_category sda 'loop0_rdio loop0_wrio sda_rdio sda_wrio graph_order disk graph_category Disk IOs per device graph_title sda_rdio #%#name normal graph_data_size GAUGE type , update_rate no graph 0 min LINE1 draw sda label I #%#parent sda_rdio , update_rate GAUGE type normal graph_data_size loop0_rdio #%#name LINE1 draw no graph 0 min I #%#parent loop0 label loop0_rdio disk graph_category rdio wrio avgrdrqsz avgwrrqsz graph_order avgrdrqsz #%#name normal graph_data_size GAUGE type , update_rate no graph 0 min LINE1 draw dummy label � #%#parent avgrdrqsz IO/sec label � #%#parent rdio negative wrio #%#name normal graph_data_size GAUGE type , update_rate LINE1 draw 0 min wrio IOs for /dev/loop0 graph_title , update_rate GAUGE type normal graph_data_size avgwrrqsz #%#name 0 min LINE1 draw � #%#parent Req Size (KB) label .Average Request Size in kilobytes (1000 based) info avgrdrqsz negative avgwrrqsz �This graph shows the number of IO operations pr second and the average size of these requests. Lots of small requests should result in in lower throughput (separate graph) and higher service time (separate graph). Please note that starting with munin-node 2.0 the divisor for K is 1000 instead of 1024 which it was prior to 2.0 beta 3. This is because the base for this graph is 1000 not 1024. graph_info Units read (-) / write (+) graph_vlabel loop0 #%#name --base 1000 graph_args I #%#parent dummy label � #%#parent normal graph_data_size rdio #%#name , update_rate GAUGE type no graph 0 min LINE1 draw rdio loop0 diskstats_iops #%#name (IOs/${graph_period} read (-) / write (+) graph_vlabel --base 1000 graph_args loop0_rdio negative 0 min LINE1 draw loop0 label normal graph_data_size loop0_wrio #%#name GAUGE type , update_rate I #%#parent loop0_wrio #%#parent diskstats_iops eth1 errors graph_title � #%#parent errors label 1 warning no graph COUNTER type , update_rate normal graph_data_size rcvd #%#name rcvd .rcvd trans rcvd trans rxdrop txdrop collisions graph_order network graph_category if_err_eth1 #%#name ,packets in (-) / out (+) per ${graph_period} graph_vlabel bThis graph shows the amount of errors, packet drops, and collisions on the eth1 network interface. graph_info collisions label � #%#parent collisions #%#name normal graph_data_size , update_rate COUNTER type collisions normal graph_data_size trans #%#name COUNTER type , update_rate 1 warning errors label � #%#parent rcvd negative trans #%#parent no graph COUNTER type , update_rate normal graph_data_size rxdrop #%#name � #%#parent drops label rxdrop txdrop #%#name normal graph_data_size drops label , update_rate � #%#parent COUNTER type rxdrop negative txdrop --base 1000 graph_args if_err_eth1 system graph_category used graph_order --base 1000 -l 0 graph_args % #%#parent open files label 9038904596117680128 critical #The number of currently open files. info , update_rate normal graph_data_size used #%#name 8485502273906394112 warning used File table usage graph_title #%#parent open_files #%#name number of open files graph_vlabel /This graph monitors the Linux open files table. graph_info open_files --base 1000 -l 0 graph_args 'Users logged in by indeterminate method info Other users label other #%#name normal graph_data_size , update_rate FF0000 colour 9 #%#parent other #%#parent %3.0lf graph_printf X #%#name normal graph_data_size 000000 colour , update_rate AREASTACK draw X displays label 9 #%#parent Users logged in on an X display info X users #%#name Users graph_vlabel system graph_category tty pty pts X other graph_order Logged in users graph_title no graph_scale pts label 9 #%#parent AREASTACK draw pts #%#name normal graph_data_size , update_rate 00FFFF colour pts AREASTACK draw normal graph_data_size tty #%#name tty label , update_rate 00FF00 colour 9 #%#parent tty pty label 9 #%#parent AREASTACK draw normal graph_data_size pty #%#name , update_rate 0000FF colour pty users http_loadtime #%#name Load time in seconds graph_vlabel )This graph shows the load time in seconds graph_info r #%#parent http://localhost/ label page load time info , update_rate http___localhost_ #%#name normal graph_data_size http___localhost_ HTTP loadtime of a page graph_title #%#parent network graph_category http___localhost_ graph_order --base 1000 -l 0 graph_args http_loadtime load #%#name load graph_vlabel sThe load average of the machine describes how many processes are in the run-queue (scheduled to run "immediately"). graph_info system graph_category load graph_order --base 1000 -l 0 graph_args no graph_scale Load average graph_title #%#parent load label normal graph_data_size load #%#name � #%#parent , update_rate 5 minute load average info load load [ 0-edge ioat-msix label � #%#parent 2Interrupt 87, for device(s): 0-edge ioat-msix info normal graph_data_size i87 #%#name DERIVE type , update_rate 0 min i87 � #%#parent 16-fasteoi ehci_hcd:usb1 label 7Interrupt 16, for device(s): 16-fasteoi ehci_hcd:usb1 info DERIVE type , update_rate i16 #%#name normal graph_data_size 0 min i16 0-edge ioat-msix label i79 #%#name normal graph_data_size DERIVE type � #%#parent , update_rate 2Interrupt 79, for device(s): 0-edge ioat-msix info 0 min i79 6Interrupt TRM, for device(s): Thermal event interrupts info Thermal event interrupts label � #%#parent 0 min iTRM #%#name normal graph_data_size , update_rate DERIVE type iTRM 4Interrupt 68, for device(s): 5-edge eth1-TxRx-4 info 5-edge eth1-TxRx-4 label � #%#parent 0 min i68 #%#name normal graph_data_size , update_rate DERIVE type i68 i9 #%#name normal graph_data_size , update_rate DERIVE type 0 min 9-fasteoi acpi label � #%#parent ,Interrupt 9, for device(s): 9-fasteoi acpi info i9 � #%#parent 8-edge megasas0-msix8 label 7Interrupt 45, for device(s): 8-edge megasas0-msix8 info DERIVE type , update_rate i45 #%#name normal graph_data_size 0 min i45 ERR label � #%#parent 0 min iERR #%#name normal graph_data_size DERIVE type , update_rate iERR � #%#parent Machine check polls label 1Interrupt MCP, for device(s): Machine check polls info DERIVE type , update_rate iMCP #%#name normal graph_data_size 0 min iMCP 6-edge eth0-TxRx-5 label i59 #%#name normal graph_data_size DERIVE type , update_rate � #%#parent 4Interrupt 59, for device(s): 6-edge eth0-TxRx-5 info 0 min i59 2Interrupt 77, for device(s): 0-edge ioat-msix info � #%#parent 0-edge ioat-msix label 0 min DERIVE type , update_rate normal graph_data_size i77 #%#name i77 0 min -Interrupt 0, for device(s): 2-edge timer info DERIVE type , update_rate � #%#parent normal graph_data_size i0 #%#name 2-edge timer label i0 DERIVE type � #%#parent , update_rate i89 #%#name normal graph_data_size 0-edge ioat-msix label 0 min 2Interrupt 89, for device(s): 0-edge ioat-msix info i89 normal graph_data_size i30 #%#name 0-edge PCIe bwctrl label , update_rate DERIVE type � #%#parent 4Interrupt 30, for device(s): 0-edge PCIe bwctrl info 0 min i30 0 min 1Interrupt SPU, for device(s): Spurious interrupts info � #%#parent , update_rate DERIVE type Spurious interrupts label normal graph_data_size iSPU #%#name iSPU Shows the number of different IRQs received by the kernel. High disk or network traffic can cause a high number of interrupts (with good hardware and drivers this will be less so). Sudden high interrupt activity with no associated higher system activity is not normal. graph_info 4Interrupt 57, for device(s): 4-edge eth0-TxRx-3 info � #%#parent 4-edge eth0-TxRx-3 label 0 min , update_rate DERIVE type normal graph_data_size i57 #%#name i57 Posted-interrupt wakeup event label � #%#parent ;Interrupt PIW, for device(s): Posted-interrupt wakeup event info iPIW #%#name normal graph_data_size , update_rate DERIVE type 0 min iPIW � #%#parent 11-edge megasas0-msix11 label 9Interrupt 48, for device(s): 11-edge megasas0-msix11 info DERIVE type , update_rate i48 #%#name normal graph_data_size 0 min i48 � #%#parent APIC ICR read retries label 3Interrupt RTR, for device(s): APIC ICR read retries info , update_rate DERIVE type normal graph_data_size iRTR #%#name 0 min iRTR 4Interrupt 65, for device(s): 2-edge eth1-TxRx-1 info 2-edge eth1-TxRx-1 label � #%#parent 0 min i65 #%#name normal graph_data_size DERIVE type , update_rate i65 2Interrupt 91, for device(s): 0-edge ioat-msix info 0-edge ioat-msix label � #%#parent 0 min normal graph_data_size i91 #%#name , update_rate DERIVE type i91 DERIVE type , update_rate normal graph_data_size iMCE #%#name 0 min � #%#parent Machine check exceptions label 6Interrupt MCE, for device(s): Machine check exceptions info iMCE 6Interrupt CAL, for device(s): Function call interrupts info � #%#parent Function call interrupts label 0 min DERIVE type , update_rate normal graph_data_size iCAL #%#name iCAL 0 min normal graph_data_size i90 #%#name DERIVE type , update_rate 2Interrupt 90, for device(s): 0-edge ioat-msix info 0-edge ioat-msix label � #%#parent i90 � #%#parent , update_rate DERIVE type normal graph_data_size i88 #%#name 0-edge ioat-msix label 0 min 2Interrupt 88, for device(s): 0-edge ioat-msix info i88 � #%#parent 23-fasteoi ehci_hcd:usb2 label 7Interrupt 23, for device(s): 23-fasteoi ehci_hcd:usb2 info DERIVE type , update_rate normal graph_data_size i23 #%#name 0 min i23 , update_rate DERIVE type normal graph_data_size i55 #%#name 0 min � #%#parent 2-edge eth0-TxRx-1 label 4Interrupt 55, for device(s): 2-edge eth0-TxRx-1 info i55 iNMI #%#name normal graph_data_size , update_rate DERIVE type 0 min Non-maskable interrupts label � #%#parent 5Interrupt NMI, for device(s): Non-maskable interrupts info iNMI 4Interrupt 31, for device(s): 0-edge PCIe bwctrl info � #%#parent 0-edge PCIe bwctrl label 0 min , update_rate DERIVE type normal graph_data_size i31 #%#name i31 , update_rate DERIVE type i67 #%#name normal graph_data_size 0 min � #%#parent 4-edge eth1-TxRx-3 label 4Interrupt 67, for device(s): 4-edge eth1-TxRx-3 info i67 0 min 9Interrupt 49, for device(s): 12-edge megasas0-msix12 info � #%#parent , update_rate DERIVE type i49 #%#name normal graph_data_size 12-edge megasas0-msix12 label i49 0 min DERIVE type , update_rate normal graph_data_size i24 #%#name .Interrupt 24, for device(s): 0-edge dmar0 info � #%#parent 0-edge dmar0 label i24 --base 1000 --logarithmic graph_args 0 min 2Interrupt 78, for device(s): 0-edge ioat-msix info , update_rate � #%#parent DERIVE type normal graph_data_size i78 #%#name 0-edge ioat-msix label i78 0 min ,Interrupt TLB, for device(s): TLB shootdowns info , update_rate DERIVE type � #%#parent iTLB #%#name normal graph_data_size TLB shootdowns label iTLB 0 min i26 #%#name normal graph_data_size DERIVE type , update_rate 4Interrupt 26, for device(s): 0-edge PCIe bwctrl info 0-edge PCIe bwctrl label � #%#parent i26 0 min normal graph_data_size iDFR #%#name DERIVE type , update_rate <Interrupt DFR, for device(s): Deferred Error APIC interrupts info Deferred Error APIC interrupts label � #%#parent iDFR 4Interrupt 69, for device(s): 6-edge eth1-TxRx-5 info � #%#parent 6-edge eth1-TxRx-5 label 0 min DERIVE type , update_rate i69 #%#name normal graph_data_size i69 0 min , update_rate DERIVE type i47 #%#name normal graph_data_size 9Interrupt 47, for device(s): 10-edge megasas0-msix10 info � #%#parent 10-edge megasas0-msix10 label i47 ?Interrupt PMI, for device(s): Performance monitoring interrupts info !Performance monitoring interrupts label � #%#parent 0 min iPMI #%#name normal graph_data_size DERIVE type , update_rate iPMI 0 min DERIVE type , update_rate normal graph_data_size i92 #%#name 2Interrupt 92, for device(s): 0-edge ioat-msix info � #%#parent 0-edge ioat-msix label i92 4Interrupt 58, for device(s): 5-edge eth0-TxRx-4 info � #%#parent 5-edge eth0-TxRx-4 label 0 min , update_rate DERIVE type normal graph_data_size i58 #%#name i58 4Interrupt 33, for device(s): 0-edge PCIe bwctrl info 0-edge PCIe bwctrl label � #%#parent 0 min normal graph_data_size i33 #%#name , update_rate DERIVE type i33 0 min 1Interrupt IWI, for device(s): IRQ work interrupts info , update_rate � #%#parent DERIVE type normal graph_data_size iIWI #%#name IRQ work interrupts label iIWI -Interrupt 63, for device(s): 0-edge eth1 info 0-edge eth1 label � #%#parent 0 min normal graph_data_size i63 #%#name DERIVE type , update_rate i63 0 min 2Interrupt 80, for device(s): 0-edge ioat-msix info , update_rate DERIVE type � #%#parent 0-edge ioat-msix label i80 #%#name normal graph_data_size i80 , update_rate DERIVE type normal graph_data_size i41 #%#name 0 min � #%#parent 4-edge megasas0-msix4 label 7Interrupt 41, for device(s): 4-edge megasas0-msix4 info i41 9Interrupt 52, for device(s): 15-edge megasas0-msix15 info 15-edge megasas0-msix15 label � #%#parent 0 min i52 #%#name normal graph_data_size DERIVE type , update_rate i52 9-edge megasas0-msix9 label � #%#parent 7Interrupt 46, for device(s): 9-edge megasas0-msix9 info i46 #%#name normal graph_data_size , update_rate DERIVE type 0 min i46 � #%#parent 2-edge megasas0-msix2 label 7Interrupt 39, for device(s): 2-edge megasas0-msix2 info DERIVE type , update_rate i39 #%#name normal graph_data_size 0 min i39 � #%#parent 1-edge eth1-TxRx-0 label 4Interrupt 64, for device(s): 1-edge eth1-TxRx-0 info DERIVE type , update_rate i64 #%#name normal graph_data_size 0 min i64 1-edge dmar1 label � #%#parent .Interrupt 72, for device(s): 1-edge dmar1 info i72 #%#name normal graph_data_size DERIVE type , update_rate 0 min i72 4Interrupt 61, for device(s): 8-edge eth0-TxRx-7 info � #%#parent 8-edge eth0-TxRx-7 label 0 min , update_rate DERIVE type i61 #%#name normal graph_data_size i61 3-edge eth1-TxRx-2 label � #%#parent 4Interrupt 66, for device(s): 3-edge eth1-TxRx-2 info normal graph_data_size i66 #%#name DERIVE type , update_rate 0 min i66 7Interrupt 37, for device(s): 0-edge megasas0-msix0 info 0-edge megasas0-msix0 label � #%#parent 0 min normal graph_data_size i37 #%#name DERIVE type , update_rate i37 7Interrupt 43, for device(s): 6-edge megasas0-msix6 info 0 min 6-edge megasas0-msix6 label i43 #%#name normal graph_data_size � #%#parent , update_rate DERIVE type i43 interrupts / ${graph_period} graph_vlabel 0 min DERIVE type , update_rate i70 #%#name normal graph_data_size 4Interrupt 70, for device(s): 7-edge eth1-TxRx-6 info � #%#parent 7-edge eth1-TxRx-6 label i70 �i0 i8 i9 i16 i18 i23 i24 i26 i28 i30 i31 i33 i37 i38 i39 i40 i41 i42 i43 i44 i45 i46 i47 i48 i49 i50 i51 i52 i53 i54 i55 i56 i57 i58 i59 i60 i61 i62 i63 i64 i65 i66 i67 i68 i69 i70 i71 i72 i74 i76 i77 i78 i79 i80 i81 i82 i84 i86 i87 i88 i89 i90 i91 i92 iNMI iLOC iSPU iPMI iIWI iRTR iRES iCAL iTLB iTRM iTHR iDFR iMCE iMCP iERR iMIS iPIN iNPI iPIW i0 i8 i9 i16 i18 i23 i24 i26 i28 i30 i31 i33 i37 i38 i39 i40 i41 i42 i43 i44 i45 i46 i47 i48 i49 i50 i51 i52 i53 i54 i55 i56 i57 i58 i59 i60 i61 i62 i63 i64 i65 i66 i67 i68 i69 i70 i71 i72 i74 i76 i77 i78 i79 i80 i81 i82 i84 i86 i87 i88 i89 i90 i91 i92 iNMI iLOC iSPU iPMI iIWI iRTR iRES iCAL iTLB iTRM iTHR iDFR iMCE iMCP iERR iMIS iPIN iNPI iPIW graph_order 0 min , update_rate DERIVE type normal graph_data_size iNPI #%#name ;Interrupt NPI, for device(s): Nested posted-interrupt event info � #%#parent Nested posted-interrupt event label iNPI normal graph_data_size i82 #%#name DERIVE type , update_rate 0 min 0-edge ioat-msix label � #%#parent 2Interrupt 82, for device(s): 0-edge ioat-msix info i82 0 min DERIVE type , update_rate normal graph_data_size i44 #%#name 7Interrupt 44, for device(s): 7-edge megasas0-msix7 info � #%#parent 7-edge megasas0-msix7 label i44 iTHR #%#name normal graph_data_size DERIVE type , update_rate 0 min Threshold APIC interrupts label � #%#parent 7Interrupt THR, for device(s): Threshold APIC interrupts info iTHR DERIVE type , update_rate i50 #%#name normal graph_data_size 0 min � #%#parent 13-edge megasas0-msix13 label 9Interrupt 50, for device(s): 13-edge megasas0-msix13 info i50 0 min 4Interrupt 18, for device(s): 18-fasteoi i801_smbus info , update_rate � #%#parent DERIVE type 18-fasteoi i801_smbus label i18 #%#name normal graph_data_size i18 AInterrupt PIN, for device(s): Posted-interrupt notification event info 0 min #Posted-interrupt notification event label normal graph_data_size iPIN #%#name � #%#parent DERIVE type , update_rate iPIN normal graph_data_size i51 #%#name DERIVE type , update_rate 0 min 14-edge megasas0-msix14 label � #%#parent 9Interrupt 51, for device(s): 14-edge megasas0-msix14 info i51 0 min , update_rate DERIVE type i84 #%#name normal graph_data_size 2Interrupt 84, for device(s): 0-edge ioat-msix info � #%#parent 0-edge ioat-msix label i84 4Interrupt 56, for device(s): 3-edge eth0-TxRx-2 info � #%#parent 3-edge eth0-TxRx-2 label 0 min DERIVE type , update_rate i56 #%#name normal graph_data_size i56 � #%#parent MIS label , update_rate DERIVE type normal graph_data_size iMIS #%#name 0 min iMIS 5-edge megasas0-msix5 label � #%#parent 7Interrupt 42, for device(s): 5-edge megasas0-msix5 info normal graph_data_size i42 #%#name DERIVE type , update_rate 0 min i42 iLOC #%#name normal graph_data_size Local timer interrupts label � #%#parent DERIVE type , update_rate 4Interrupt LOC, for device(s): Local timer interrupts info 0 min iLOC system graph_category 8-edge rtc0 label � #%#parent ,Interrupt 8, for device(s): 8-edge rtc0 info i8 #%#name normal graph_data_size , update_rate DERIVE type 0 min i8 4Interrupt 60, for device(s): 7-edge eth0-TxRx-6 info � #%#parent 7-edge eth0-TxRx-6 label 0 min , update_rate DERIVE type normal graph_data_size i60 #%#name i60 � #%#parent , update_rate DERIVE type 0-edge PCIe bwctrl label i28 #%#name normal graph_data_size 0 min 4Interrupt 28, for device(s): 0-edge PCIe bwctrl info i28 DERIVE type � #%#parent , update_rate 8-edge eth1-TxRx-7 label normal graph_data_size i71 #%#name 0 min 4Interrupt 71, for device(s): 8-edge eth1-TxRx-7 info i71 2Interrupt 76, for device(s): 0-edge ioat-msix info � #%#parent 0-edge ioat-msix label 0 min , update_rate DERIVE type i76 #%#name normal graph_data_size i76 0-edge ahci[0000:00:1f.2] label � #%#parent ;Interrupt 62, for device(s): 0-edge ahci[0000:00:1f.2] info normal graph_data_size i62 #%#name , update_rate DERIVE type 0 min i62 #%#parent 0 min normal graph_data_size i38 #%#name , update_rate DERIVE type 7Interrupt 38, for device(s): 1-edge megasas0-msix1 info 1-edge megasas0-msix1 label � #%#parent i38 , update_rate DERIVE type � #%#parent 0-edge ioat-msix label normal graph_data_size i74 #%#name 0 min 2Interrupt 74, for device(s): 0-edge ioat-msix info i74 irqstats #%#name i53 #%#name normal graph_data_size , update_rate DERIVE type 0 min 0-edge eth0 label � #%#parent -Interrupt 53, for device(s): 0-edge eth0 info i53 Individual interrupts graph_title i86 #%#name normal graph_data_size , update_rate DERIVE type 0 min 0-edge ioat-msix label � #%#parent 2Interrupt 86, for device(s): 0-edge ioat-msix info i86 0 min , update_rate DERIVE type normal graph_data_size iRES #%#name 5Interrupt RES, for device(s): Rescheduling interrupts info � #%#parent Rescheduling interrupts label iRES 2Interrupt 81, for device(s): 0-edge ioat-msix info 0-edge ioat-msix label � #%#parent 0 min normal graph_data_size i81 #%#name , update_rate DERIVE type i81 DERIVE type , update_rate i54 #%#name normal graph_data_size 0 min � #%#parent 1-edge eth0-TxRx-0 label 4Interrupt 54, for device(s): 1-edge eth0-TxRx-0 info i54 7Interrupt 40, for device(s): 3-edge megasas0-msix3 info � #%#parent 3-edge megasas0-msix3 label 0 min , update_rate DERIVE type normal graph_data_size i40 #%#name i40 irqstats forwarded #%#name normal graph_data_size , update_rate DERIVE type 0 min LINE2 draw Forwarded label � #%#parent forwarded #%#parent Firewall Throughput graph_title --base 1000 -l 0 graph_args network graph_category received forwarded graph_order fw_packets #%#name Packets/${graph_period} graph_vlabel Received label received #%#name normal graph_data_size , update_rate DERIVE type � #%#parent 0 min AREA draw received fw_packets mails in queue graph_vlabel exim_mailqueue #%#name mails frozen graph_order exim graph_category --base 1000 -l 0 graph_args frozen #%#name normal graph_data_size , update_rate 0022FF colour STACK draw 0:100 warning frozen mails label � #%#parent 0:200 critical frozen Exim Mailqueue graph_title 0:200 critical � #%#parent queued mails label AREA draw 0:100 warning , update_rate 00AA00 colour mails #%#name normal graph_data_size mails #%#parent exim_mailqueue mysql_bytes #%#name 1bytes received (-) / sent (+) per ${graph_period} graph_vlabel recv #%#name normal graph_data_size DERIVE type , update_rate 80000000 max LINE2 draw 0 min no graph transfer rate label #%#parent recv �Note that this is a old plugin which is no longer installed by default. It is retained for compatability with old installations. graph_info , update_rate DERIVE type sent #%#name normal graph_data_size 0 min LINE2 draw 80000000 max #%#parent transfer rate label recv negative sent mysql graph_category recv sent graph_order --base 1024 graph_args MySQL throughput graph_title #%#parent mysql_bytes system graph_category intr ctx graph_order --base 1000 -l 0 graph_args Interrupts and context switches graph_title #%#parent �Interrupts are events that alter sequence of instructions executed by a processor. They can come from either hardware (exceptions, NMI, IRQ) or software. info interrupts label ; #%#parent 0 min normal graph_data_size intr #%#name DERIVE type , update_rate intr interrupts #%#name context switches label normal graph_data_size ctx #%#name , update_rate DERIVE type ; #%#parent �A context switch occurs when a multitasking operatings system suspends the currently running process, and starts executing another. info 0 min ctx +interrupts & ctx switches / ${graph_period} graph_vlabel xThis graph shows the number of interrupts and context switches on the system. These are typically high on a busy system. graph_info interrupts HThis graph shows the number of forks (new processes started) per second. graph_info forks #%#name forks / ${graph_period} graph_vlabel 0 min 100000 max forks #%#name normal graph_data_size , update_rate DERIVE type The number of forks per second. info forks label Y #%#parent forks #%#parent Fork rate graph_title --base 1000 -l 0 graph_args forks graph_order processes graph_category forks , update_rate DERIVE type n #%#parent guest label guest #%#name normal graph_data_size 0 min STACK draw gThe time spent running a virtual CPU for guest operating systems under the control of the Linux kernel. info guest no graph_scale CPU usage graph_title ]system user nice idle iowait irq softirq system user nice idle iowait irq softirq steal guest graph_order system graph_category normal graph_data_size idle #%#name , update_rate DERIVE type 0 min STACK draw idle label n #%#parent Idle CPU time info idle ZThe time that a virtual CPU had runnable tasks, but the virtual CPU itself was not running info steal label n #%#parent 0 min STACK draw steal #%#name normal graph_data_size DERIVE type , update_rate steal UCPU time spent waiting for I/O operations to finish when there is nothing else to do. info iowait label n #%#parent STACK draw 0 min normal graph_data_size iowait #%#name DERIVE type , update_rate iowait DERIVE type , update_rate user #%#name normal graph_data_size 0 min STACK draw n #%#parent user label -CPU time spent by normal programs and daemons info user #%#parent #CPU time spent by nice(1)d programs info n #%#parent nice label STACK draw 0 min , update_rate DERIVE type normal graph_data_size nice #%#name nice 1--base 1000 -r --lower-limit 0 --upper-limit 2400 graph_args AREA draw 0 min 1CPU time spent by the kernel in system activities info DERIVE type , update_rate n #%#parent system #%#name normal graph_data_size system label system 'This graph shows how CPU time is spent. graph_info cpu #%#name % graph_vlabel n #%#parent softirq label ,CPU time spent handling "batched" interrupts info DERIVE type , update_rate normal graph_data_size softirq #%#name STACK draw 0 min softirq second graph_period , update_rate DERIVE type n #%#parent irq #%#name normal graph_data_size irq label STACK draw 0 min "CPU time spent handling interrupts info irq cpu )bits in (-) / out (+) per ${graph_period} graph_vlabel if_eth1 #%#name bps label � #%#parent down negative :Traffic of the eth1 interface. Maximum speed is 1000 Mb/s. info up,8,* cdef up #%#name normal graph_data_size , update_rate DERIVE type 1000000000 max 0 min up @This graph shows the traffic of the eth1 network interface. Please note that the traffic is shown in bits per second, not bytes. IMPORTANT: On 32-bit systems the data source for this plugin uses 32-bit counters, which makes the plugin unreliable and unsuitable for most 100-Mb/s (or faster) interfaces, where traffic is expected to exceed 50 Mb/s over a 5 minute period. This means that this plugin is unsuitable for most 32-bit production environments. To avoid this problem, use the ip_ plugin instead. There should be no problems on 64-bit systems running 64-bit kernels. graph_info network graph_category down up down up graph_order --base 1000 graph_args eth1 traffic graph_title #%#parent normal graph_data_size down #%#name , update_rate DERIVE type 0 min no graph 1000000000 max received label � #%#parent down,8,* cdef down if_eth1 #%#parent , update_rate thermal_zone0 #%#name normal graph_data_size x86_pkg_temp label thermal_zone0 Celsius graph_vlabel acpi #%#name �This graph shows the temperature in different ACPI Thermal zones. If there is only one it will usually be the case temperature. graph_info #%#parent , update_rate x86_pkg_temp label normal graph_data_size thermal_zone1 #%#name thermal_zone1 thermal_zone0 thermal_zone1 graph_order sensors graph_category ACPI Thermal zone temperatures graph_title #%#parent acpi nc-ph-1432-21.okaminime.com #%#name system graph_category swap_in swap_out graph_order swap label #%#parent 100000 max 0 min no graph swap_in #%#name normal graph_data_size , update_rate DERIVE type swap_in -l 0 --base 1000 graph_args Swap in/out graph_title #%#parent 100000 max 0 min normal graph_data_size swap_out #%#name , update_rate DERIVE type swap_in negative swap label #%#parent swap_out swap #%#name *pages per ${graph_period} in (-) / out (+) graph_vlabel swap )--units=si -l 1 --base 1000 --logarithmic graph_args #%#parent normal graph_data_size resets #%#name DERIVE type , update_rate 50000 max 0 min resets label 7 #%#parent $The number of TCP connection resets. info resets normal graph_data_size passive #%#name DERIVE type , update_rate 50000 max 0 min passive label 7 #%#parent .The number of passive TCP openings per second. info passive second graph_period IThis graph shows the TCP activity of all the network interfaces combined. graph_info TCP connections graph_vlabel netstat #%#name network graph_category (active passive failed resets established graph_order active #%#name normal graph_data_size DERIVE type , update_rate 50000 max 0 min active label 7 #%#parent -The number of active TCP openings per second. info active , update_rate GAUGE type 7 #%#parent established label established #%#name normal graph_data_size )The number of currently open connections. info established Netstat, combined graph_title 50000 max 0 min normal graph_data_size failed #%#name , update_rate DERIVE type 8The number of failed TCP connection attempts per second. info failed label 7 #%#parent failed netstat /run/user/0 label w #%#parent 98 critical normal graph_data_size _run_user_0 #%#name , update_rate 92 warning _run_user_0 normal graph_data_size _run_user_1001 #%#name /run/user/1001 label w #%#parent , update_rate 98 critical 92 warning _run_user_1001 --upper-limit 100 -l 0 graph_args 92 warning , update_rate _dev_sda3 #%#name normal graph_data_size 98 critical w #%#parent / label _dev_sda3 #%#parent 92 warning , update_rate _run_user_967 #%#name normal graph_data_size 98 critical w #%#parent /run/user/967 label _run_user_967 98 critical 92 warning /dev label normal graph_data_size devtmpfs #%#name w #%#parent , update_rate devtmpfs % graph_vlabel df_inode #%#name 92 warning , update_rate normal graph_data_size _dev_sda1 #%#name 98 critical w #%#parent /boot label _dev_sda1 98 critical 92 warning /dev/shm label normal graph_data_size _dev_shm #%#name , update_rate w #%#parent _dev_shm ^devtmpfs _dev_shm _run _dev_sda3 _dev_sda1 _dev_loop0 _run_user_1001 _run_user_967 _run_user_0 graph_order disk graph_category no graph_scale Inode usage in percent graph_title 98 critical 92 warning normal graph_data_size _dev_loop0 #%#name /tmp label , update_rate w #%#parent _dev_loop0 98 critical w #%#parent /run label 92 warning , update_rate normal graph_data_size _run #%#name _run df_inode � #%#parent rejected label 0 min , update_rate DERIVE type normal graph_data_size rejected #%#name rejected --base 1000 -l 0 graph_args received completed rejected graph_order exim graph_category #%#parent completed label � #%#parent 0 min completed #%#name normal graph_data_size DERIVE type , update_rate completed Exim mail throughput graph_title no graph_scale AREA draw 0 min received #%#name normal graph_data_size received label � #%#parent DERIVE type , update_rate received mails/${graph_period} graph_vlabel exim_mailstats #%#name exim_mailstats proc_pri #%#name � #%#parent locked in memory label XThe number of processes that have pages locked into memory (for real-time and custom IO) info , update_rate normal graph_data_size locked #%#name STACK draw locked Number of processes graph_vlabel 5This graph shows number of processes at each priority graph_info processes graph_category low high locked high low locked graph_order ,The number of low-priority processes (tasks) info AREA draw normal graph_data_size low #%#name low priority label � #%#parent , update_rate low --base 1000 -l 0 graph_args Processes priority graph_title STACK draw high #%#name normal graph_data_size , update_rate -The number of high-priority processes (tasks) info high priority label � #%#parent high #%#parent proc_pri mysql_innodb #%#name Bytes graph_vlabel #Free bytes in the InnoDB tablespace graph_info 1073741824: critical 0 min 2147483648: warning Bytes free label free #%#name normal graph_data_size , update_rate #%#parent GAUGE type free mysql graph_category free graph_order --base 1024 graph_args MySQL InnoDB free tablespace graph_title #%#parent mysql_innodb if_eth0 #%#name )bits in (-) / out (+) per ${graph_period} graph_vlabel :Traffic of the eth0 interface. Maximum speed is 1000 Mb/s. info down negative up,8,* cdef 2 #%#parent bps label 1000000000 max 0 min , update_rate DERIVE type up #%#name normal graph_data_size up @This graph shows the traffic of the eth0 network interface. Please note that the traffic is shown in bits per second, not bytes. IMPORTANT: On 32-bit systems the data source for this plugin uses 32-bit counters, which makes the plugin unreliable and unsuitable for most 100-Mb/s (or faster) interfaces, where traffic is expected to exceed 50 Mb/s over a 5 minute period. This means that this plugin is unsuitable for most 32-bit production environments. To avoid this problem, use the ip_ plugin instead. There should be no problems on 64-bit systems running 64-bit kernels. graph_info down up down up graph_order network graph_category --base 1000 graph_args eth0 traffic graph_title #%#parent down,8,* cdef received label 2 #%#parent no graph 0 min 1000000000 max normal graph_data_size down #%#name DERIVE type , update_rate down if_eth0 loop0 #%#name % busy graph_vlabel Utilization label util #%#name normal graph_data_size W #%#parent GAUGE type , update_rate �Utilization of the device in percent. If the time spent for I/O is close to 1000msec for a given second, the device is nearly 100% saturated. info 0 min LINE1 draw util Disk utilization for /dev/loop0 graph_title no graph_scale U #%#parent disk graph_category util graph_order 5--base 1000 --lower-limit 0 --upper-limit 100 --rigid graph_args loop0 % busy graph_vlabel diskstats_utilization #%#name #%#parent 5--base 1000 --lower-limit 0 --upper-limit 100 --rigid graph_args 400 graph_width Utilization per device graph_title no graph_scale Utilization label s #%#parent �Utilization of the device in percent. If the time spent for I/O is close to 1000msec for a given second, the device is nearly 100% saturated. info util #%#name normal graph_data_size GAUGE type , update_rate 0 min LINE1 draw util sda #%#name % busy graph_vlabel 5--base 1000 --lower-limit 0 --upper-limit 100 --rigid graph_args disk graph_category util graph_order U #%#parent Disk utilization for /dev/sda graph_title no graph_scale sda loop0_util sda_util graph_order 0 min LINE1 draw GAUGE type , update_rate normal graph_data_size sda_util #%#name Utilization of the device info U #%#parent sda label sda_util disk graph_category loop0_util #%#name normal graph_data_size loop0 label GAUGE type U #%#parent , update_rate Utilization of the device info LINE1 draw 0 min loop0_util diskstats_utilization IThis graph shows the TCP activity of all the network interfaces combined. graph_info netstat_established #%#name TCP connections graph_vlabel second graph_period #%#parent )The number of currently open connections. info , update_rate � #%#parent GAUGE type normal graph_data_size established #%#name established label established Netstat, established only graph_title --lower-limit 0 graph_args network graph_category established graph_order netstat_established LINE1 draw 0 min loop0_avgwait #%#name normal graph_data_size , update_rate GAUGE type $Average wait time for an I/O request info loop0 label � #%#parent loop0_avgwait 400 graph_width disk graph_category !svctm avgwait avgrdwait avgwrwait graph_order normal graph_data_size svctm #%#name , update_rate GAUGE type 0 min LINE1 draw Device IO time label � #%#parent {Average time an I/O takes on the block device not including any queue times, just the round trip time for the disk request. info svctm Average latency for /dev/sda graph_title LINE1 draw 0:3 warning 0 min normal graph_data_size avgwrwait #%#name , update_rate GAUGE type [Average wait time for a write I/O from request start to finish (includes queue times et al) info Write IO Wait time label � #%#parent avgwrwait VAverage wait time for an I/O from request start to finish (includes queue times et al) info � #%#parent IO Wait time label 0 min LINE1 draw GAUGE type , update_rate avgwait #%#name normal graph_data_size avgwait � #%#parent Read IO Wait time label ZAverage wait time for a read I/O from request start to finish (includes queue times et al) info GAUGE type , update_rate avgrdwait #%#name normal graph_data_size 0 min LINE1 draw 0:3 warning avgrdwait --base 1000 --logarithmic graph_args � #%#parent sda #%#name seconds graph_vlabel �This graph shows average waiting time/latency for different categories of disk operations. The times that include the queue times indicate how busy your system is. If the waiting time hits 1 second then your I/O system is 100% busy. graph_info sda loop0_avgwait sda_avgwait graph_order disk graph_category Disk latency per device graph_title Write IO Wait time label � #%#parent [Average wait time for a write I/O from request start to finish (includes queue times et al) info avgwrwait #%#name normal graph_data_size , update_rate GAUGE type 0 min 0:3 warning LINE1 draw avgwrwait {Average time an I/O takes on the block device not including any queue times, just the round trip time for the disk request. info Device IO time label � #%#parent LINE1 draw 0 min svctm #%#name normal graph_data_size , update_rate GAUGE type svctm !svctm avgwait avgrdwait avgwrwait graph_order disk graph_category Average latency for /dev/loop0 graph_title �This graph shows average waiting time/latency for different categories of disk operations. The times that include the queue times indicate how busy your system is. If the waiting time hits 1 second then your I/O system is 100% busy. graph_info loop0 #%#name seconds graph_vlabel --base 1000 --logarithmic graph_args � #%#parent Read IO Wait time label ZAverage wait time for a read I/O from request start to finish (includes queue times et al) info GAUGE type , update_rate avgrdwait #%#name normal graph_data_size 0 min 0:3 warning LINE1 draw avgrdwait normal graph_data_size avgwait #%#name IO Wait time label � #%#parent GAUGE type , update_rate VAverage wait time for an I/O from request start to finish (includes queue times et al) info LINE1 draw 0 min avgwait � #%#parent loop0 diskstats_latency #%#name Average IO Wait (seconds) graph_vlabel LINE1 draw 0 min GAUGE type , update_rate sda_avgwait #%#name normal graph_data_size $Average wait time for an I/O request info � #%#parent sda label sda_avgwait --base 1000 graph_args #%#parent diskstats_latency #%#parent mysql graph_category threads graph_order --base 1000 graph_args MySQL threads graph_title #%#parent , update_rate E #%#parent normal graph_data_size threads #%#name mysql threads label threads threads graph_vlabel mysql_threads #%#name �Note that this is a old plugin which is no longer installed by default. It is retained for compatability with old installations. graph_info mysql_threads vmstat #%#name process states graph_vlabel --base 1000 -l 0 graph_args running label V #%#parent normal graph_data_size wait #%#name GAUGE type , update_rate 500000 max wait wait sleep graph_order processes graph_category 500000 max , update_rate GAUGE type normal graph_data_size sleep #%#name V #%#parent I/O sleep label sleep #%#parent VMstat graph_title vmstat normal graph_data_size cpu7 #%#name , update_rate GAUGE type 2860000 max 1200000 min CPU 7 label q #%#parent cpu7,1000,* cdef cpu7 1200000 min 2860000 max GAUGE type , update_rate cpu2 #%#name normal graph_data_size cpu2,1000,* cdef q #%#parent CPU 2 label cpu2 CPU 9 label q #%#parent cpu9,1000,* cdef cpu9 #%#name normal graph_data_size , update_rate GAUGE type 1200000 min 2860000 max cpu9 system graph_category CPU 13 label q #%#parent cpu13,1000,* cdef cpu13 #%#name normal graph_data_size GAUGE type , update_rate 2860000 max 1200000 min cpu13 , update_rate GAUGE type q #%#parent normal graph_data_size cpu4 #%#name CPU 4 label 2860000 max 1200000 min cpu4,1000,* cdef cpu4 1200000 min 2860000 max , update_rate GAUGE type cpu10 #%#name normal graph_data_size cpu10,1000,* cdef q #%#parent CPU 10 label cpu10 normal graph_data_size cpu5 #%#name GAUGE type , update_rate 2860000 max 1200000 min CPU 5 label q #%#parent cpu5,1000,* cdef cpu5 cpu21,1000,* cdef CPU 21 label q #%#parent 2860000 max 1200000 min normal graph_data_size cpu21 #%#name GAUGE type , update_rate cpu21 CPU 8 label q #%#parent cpu8,1000,* cdef cpu8 #%#name normal graph_data_size , update_rate GAUGE type 1200000 min 2860000 max cpu8 cpu22,1000,* cdef q #%#parent CPU 22 label 2860000 max 1200000 min , update_rate GAUGE type normal graph_data_size cpu22 #%#name cpu22 cpu18,1000,* cdef q #%#parent CPU 18 label 2860000 max 1200000 min GAUGE type , update_rate normal graph_data_size cpu18 #%#name cpu18 q #%#parent CPU 3 label cpu3,1000,* cdef , update_rate GAUGE type cpu3 #%#name normal graph_data_size 1200000 min 2860000 max cpu3 cpu0,1000,* cdef CPU 0 label q #%#parent 1200000 min 2860000 max cpu0 #%#name normal graph_data_size , update_rate GAUGE type cpu0 cpu15 #%#name normal graph_data_size CPU 15 label , update_rate q #%#parent GAUGE type cpu15,1000,* cdef 2860000 max 1200000 min cpu15 1200000 min 2860000 max cpu12,1000,* cdef GAUGE type q #%#parent , update_rate CPU 12 label normal graph_data_size cpu12 #%#name cpu12 CPU frequency scaling graph_title CPU 11 label normal graph_data_size cpu11 #%#name GAUGE type q #%#parent , update_rate cpu11,1000,* cdef 1200000 min 2860000 max cpu11 normal graph_data_size cpu20 #%#name , update_rate GAUGE type 2860000 max 1200000 min CPU 20 label q #%#parent cpu20,1000,* cdef cpu20 �cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7 cpu8 cpu9 cpu10 cpu11 cpu12 cpu13 cpu14 cpu15 cpu16 cpu17 cpu18 cpu19 cpu20 cpu21 cpu22 cpu23 graph_order CPU 16 label q #%#parent cpu16,1000,* cdef normal graph_data_size cpu16 #%#name GAUGE type , update_rate 2860000 max 1200000 min cpu16 Hz graph_vlabel 1200000 min 2860000 max , update_rate GAUGE type normal graph_data_size cpu17 #%#name cpu17,1000,* cdef q #%#parent CPU 17 label cpu17 cpuspeed #%#name 2860000 max 1200000 min cpu23 #%#name normal graph_data_size , update_rate GAUGE type cpu23,1000,* cdef CPU 23 label q #%#parent cpu23 �This graph shows the current speed of the CPU at the time of the data retrieval (not its average). This is a limitiation of the 'intel_pstate' driver. graph_info q #%#parent CPU 19 label cpu19,1000,* cdef , update_rate GAUGE type cpu19 #%#name normal graph_data_size 2860000 max 1200000 min cpu19 CPU 14 label q #%#parent cpu14,1000,* cdef normal graph_data_size cpu14 #%#name , update_rate GAUGE type 1200000 min 2860000 max cpu14 #%#parent normal graph_data_size cpu1 #%#name CPU 1 label GAUGE type , update_rate q #%#parent cpu1,1000,* cdef 2860000 max 1200000 min cpu1 cpu6,1000,* cdef 1200000 min 2860000 max CPU 6 label cpu6 #%#name normal graph_data_size , update_rate q #%#parent GAUGE type cpu6 --base 1000 graph_args cpuspeed 'This graph shows the number of threads. graph_info � #%#parent threads label The current number of threads. info , update_rate normal graph_data_size threads #%#name threads threads #%#name number of threads graph_vlabel processes graph_category threads graph_order #%#parent Number of threads graph_title threads Throughput per device graph_title GAUGE type , update_rate loop0_wrbytes #%#name normal graph_data_size 0 min LINE1 draw � #%#parent loop0 label loop0_rdbytes negative loop0_wrbytes 3loop0_rdbytes loop0_wrbytes sda_rdbytes sda_wrbytes graph_order disk graph_category 'Pr ${graph_period} read (-) / write (+) graph_vlabel sda #%#name xThis graph shows disk throughput in bytes pr ${graph_period}. The graph base is 1024 so KB is for Kibi bytes and so on. graph_info LINE1 draw 0 min , update_rate GAUGE type normal graph_data_size wrbytes #%#name rdbytes negative � #%#parent Bytes label wrbytes Disk throughput for /dev/sda graph_title � #%#parent invisible label , update_rate GAUGE type normal graph_data_size rdbytes #%#name 0 min no graph LINE1 draw rdbytes � #%#parent rdbytes wrbytes graph_order disk graph_category --base 1024 graph_args sda no graph 0 min LINE1 draw normal graph_data_size loop0_rdbytes #%#name , update_rate GAUGE type loop0 label � #%#parent loop0_rdbytes 400 graph_width GAUGE type , update_rate normal graph_data_size sda_wrbytes #%#name 0 min LINE1 draw � #%#parent sda label sda_rdbytes negative sda_wrbytes #%#parent LINE1 draw no graph 0 min , update_rate GAUGE type normal graph_data_size sda_rdbytes #%#name � #%#parent sda label sda_rdbytes --base 1024 graph_args *Bytes/${graph_period} read (-) / write (+) graph_vlabel diskstats_throughput #%#name loop0 #%#name 'Pr ${graph_period} read (-) / write (+) graph_vlabel xThis graph shows disk throughput in bytes pr ${graph_period}. The graph base is 1024 so KB is for Kibi bytes and so on. graph_info rdbytes wrbytes graph_order disk graph_category --base 1024 graph_args Disk throughput for /dev/loop0 graph_title LINE1 draw 0 min wrbytes #%#name normal graph_data_size GAUGE type , update_rate rdbytes negative Bytes label � #%#parent wrbytes invisible label � #%#parent 0 min no graph LINE1 draw rdbytes #%#name normal graph_data_size GAUGE type , update_rate rdbytes � #%#parent loop0 �This graph shows averaged throughput for the given disk in bytes. Higher throughput is usualy linked with higher service time/latency (separate graph). The graph base is 1024 yeilding Kibi- and Mebi-bytes. graph_info diskstats_throughput #%#parent 92 warning _dev_sda3 #%#name normal graph_data_size , update_rate 98 critical / label #%#parent _dev_sda3 normal graph_data_size _run_user_1001 #%#name /run/user/1001 label #%#parent , update_rate 98 critical 92 warning _run_user_1001 #%#parent , update_rate /run/user/0 label normal graph_data_size _run_user_0 #%#name 92 warning 98 critical _run_user_0 --upper-limit 100 -l 0 graph_args normal graph_data_size _dev_sda1 #%#name , update_rate 92 warning /boot label #%#parent 98 critical _dev_sda1 % graph_vlabel df #%#name 98 critical 92 warning normal graph_data_size _dev_shm #%#name /dev/shm label , update_rate #%#parent _dev_shm , update_rate #%#parent /run/user/967 label _run_user_967 #%#name normal graph_data_size 92 warning 98 critical _run_user_967 , update_rate #%#parent /tmp label _dev_loop0 #%#name normal graph_data_size 92 warning 98 critical _dev_loop0 no graph_scale Disk usage in percent graph_title normal graph_data_size _run #%#name /run label #%#parent , update_rate 98 critical 92 warning _run disk graph_category U_dev_shm _run _dev_sda3 _dev_sda1 _dev_loop0 _run_user_1001 _run_user_967 _run_user_0 graph_order df /This graph monitors the Linux open inode table. graph_info number of open inodes graph_vlabel open_inodes #%#name inode table size label ] #%#parent OThe size of the system inode table. This is dynamically adjusted by the kernel. info max #%#name normal graph_data_size , update_rate max #%#parent Inode table usage graph_title --base 1000 -l 0 graph_args open inodes label normal graph_data_size used #%#name , update_rate ] #%#parent $The number of currently open inodes. info used system graph_category used max graph_order open_inodes (This graph shows the number of processes graph_info 3The number of paging processes (<2.6 kernels only). info w #%#parent paging label STACK draw 00aaaa colour , update_rate paging #%#name normal graph_data_size paging processes #%#name Number of processes graph_vlabel , update_rate 0022ff colour w #%#parent sleeping #%#name normal graph_data_size sleeping label AREA draw !The number of sleeping processes. info sleeping uninterruptible label w #%#parent 5The number of uninterruptible processes (usually IO). info normal graph_data_size uninterruptible #%#name , update_rate ffa500 colour STACK draw uninterruptible #%#parent dead label normal graph_data_size dead #%#name , update_rate ff0000 colour w #%#parent The number of dead processes. info STACK draw dead --base 1000 -l 0 graph_args WThe number of defunct ('zombie') processes (process terminated and parent not waiting). info zombie label w #%#parent STACK draw normal graph_data_size zombie #%#name 990000 colour , update_rate zombie 8The number of idle kernel threads (>= 4.2 kernels only). info idle label w #%#parent STACK draw idle #%#name normal graph_data_size 4169e1 colour , update_rate idle *The number of stopped or traced processes. info w #%#parent stopped label STACK draw cc0000 colour , update_rate normal graph_data_size stopped #%#name stopped The total number of processes. info w #%#parent total label LINE1 draw , update_rate c0c0c0 colour processes #%#name normal graph_data_size processes Processes graph_title STACK draw normal graph_data_size runnable #%#name 22ff22 colour , update_rate 4The number of runnable processes (on the run queue). info runnable label w #%#parent runnable processes graph_category �sleeping idle stopped zombie dead paging uninterruptible runnable processes dead paging idle sleeping uninterruptible stopped runnable zombie processes graph_order processes mysql graph_category .select delete insert update replace cache_hits graph_order MySQL queries graph_title STACK draw 500000 max 0 min normal graph_data_size insert #%#name , update_rate DERIVE type insert label � #%#parent insert --base 1000 graph_args replace label � #%#parent 0 min 500000 max STACK draw normal graph_data_size replace #%#name , update_rate DERIVE type replace #%#parent 0 min STACK draw 500000 max update #%#name normal graph_data_size DERIVE type , update_rate update label � #%#parent update total graph_total cache_hits label � #%#parent normal graph_data_size cache_hits #%#name DERIVE type , update_rate STACK draw 500000 max 0 min cache_hits �Note that this is a old plugin which is no longer installed by default. It is retained for compatability with old installations. graph_info delete label � #%#parent normal graph_data_size delete #%#name DERIVE type , update_rate STACK draw 500000 max 0 min delete select label � #%#parent 500000 max AREA draw 0 min select #%#name normal graph_data_size DERIVE type , update_rate select mysql_queries #%#name queries / ${graph_period} graph_vlabel mysql_queries , update_rate COLOUR9 colour normal graph_data_size shmem #%#name STACK draw ( #%#parent shmem label )Shared Memory (SYSV SHM segments, tmpfs). info shmem Memory usage graph_title vmalloc_used label vmalloc_used #%#name normal graph_data_size , update_rate ( #%#parent COLOUR8 colour 'VMalloc' (kernel) memory used info LINE2 draw vmalloc_used AREA draw COLOUR0 colour , update_rate apps #%#name normal graph_data_size 'Memory used by user-space applications. info ( #%#parent apps label apps LINE2 draw , update_rate COLOUR12 colour normal graph_data_size active #%#name @Memory recently used. Not reclaimed unless absolutely necessary. info ( #%#parent active label active �apps page_tables per_cpu swap_cache slab shmem cached buffers free swap apps buffers swap cached free shmem slab swap_cache page_tables per_cpu vmalloc_used committed mapped active inactive graph_order system graph_category page_tables label ( #%#parent AMemory used to map between virtual and physical memory addresses. info normal graph_data_size page_tables #%#name COLOUR1 colour , update_rate STACK draw page_tables gA piece of memory that keeps track of pages that have been fetched from swap but not yet been modified. info STACK draw normal graph_data_size swap_cache #%#name swap_cache label COLOUR2 colour ( #%#parent , update_rate swap_cache STACK draw Per CPU allocations info COLOUR20 colour , update_rate ( #%#parent per_cpu label normal graph_data_size per_cpu #%#name per_cpu ( #%#parent slab_cache label LMemory used by the kernel (major users are caches like inode, dentry, etc). info COLOUR3 colour , update_rate normal graph_data_size slab #%#name STACK draw slab &Parked file data (file content) cache. info cache label ( #%#parent STACK draw normal graph_data_size cached #%#name COLOUR4 colour , update_rate cached #%#parent free #%#name normal graph_data_size , update_rate COLOUR6 colour STACK draw unused label ( #%#parent ;Wasted memory. Memory that is not used for anything at all. info free committed #%#name normal graph_data_size COLOUR10 colour , update_rate LINE2 draw committed label ( #%#parent dThe amount of memory allocated to programs. Overcommitting is normal, but may indicate memory leaks. info committed *--base 1024 -l 0 --upper-limit 66947289088 graph_args STACK draw COLOUR5 colour , update_rate buffers #%#name normal graph_data_size WBlock device (e.g. harddisk) cache. Also where "dirty" blocks are stored until written. info ( #%#parent buffers label buffers STACK draw Swap space used. info ( #%#parent COLOUR7 colour , update_rate swap label swap #%#name normal graph_data_size swap Bytes graph_vlabel memory #%#name 2This graph shows what the machine uses memory for. graph_info Memory not currently used. info LINE2 draw inactive #%#name normal graph_data_size inactive label COLOUR15 colour , update_rate ( #%#parent inactive All mmap()ed pages. info mapped label ( #%#parent LINE2 draw normal graph_data_size mapped #%#name , update_rate COLOUR11 colour mapped memory ,packets in (-) / out (+) per ${graph_period} graph_vlabel if_err_eth0 #%#name bThis graph shows the amount of errors, packet drops, and collisions on the eth0 network interface. graph_info normal graph_data_size collisions #%#name COUNTER type , update_rate collisions label � #%#parent collisions COUNTER type , update_rate normal graph_data_size trans #%#name 1 warning � #%#parent errors label rcvd negative trans #%#parent normal graph_data_size rxdrop #%#name COUNTER type , update_rate no graph drops label � #%#parent rxdrop � #%#parent drops label rxdrop negative COUNTER type , update_rate normal graph_data_size txdrop #%#name txdrop --base 1000 graph_args eth0 errors graph_title normal graph_data_size rcvd #%#name errors label , update_rate � #%#parent COUNTER type 1 warning no graph rcvd network graph_category .rcvd trans rcvd trans rxdrop txdrop collisions graph_order if_err_eth0 AREA draw uptime label uptime #%#name normal graph_data_size , update_rate #%#parent uptime --base 1000 -l 0 graph_args system graph_category uptime graph_order #%#parent Uptime graph_title no graph_scale uptime #%#name uptime in days graph_vlabel uptime --base 1000 -l 0 graph_args mysql graph_category queries graph_order #%#parent MySQL slow queries graph_title #%#parent slow queries label 500000 max 0 min DERIVE type , update_rate normal graph_data_size queries #%#name queries �Note that this is a old plugin which is no longer installed by default. It is retained for compatability with old installations. graph_info slow queries / ${graph_period} graph_vlabel mysql_slowqueries #%#name mysql_slowqueries nc-ph-1432-21.okaminime.com okaminime.com #%#name okaminime.com 2.0.73 version
Back