Edit File: datafile.storable
pst0 2.0.73 version okaminime.com #%#name * swap_in swap_out graph_order #%#parent DERIVE type 0 min swap label swap_in negative , update_rate swap_out #%#name normal graph_data_size 100000 max swap_out swap #%#name Swap in/out graph_title -l 0 --base 1000 graph_args *pages per ${graph_period} in (-) / out (+) graph_vlabel system graph_category , update_rate swap label 0 min #%#parent DERIVE type normal graph_data_size 100000 max no graph swap_in #%#name swap_in #%#parent swap #%#parent DERIVE type AREA draw ' #%#parent received label 0 min , update_rate received #%#name normal graph_data_size received completed #%#name normal graph_data_size DERIVE type ' #%#parent 0 min completed label , update_rate completed exim graph_category mails/${graph_period} graph_vlabel --base 1000 -l 0 graph_args Exim mail throughput graph_title no graph_scale exim_mailstats #%#name normal graph_data_size rejected #%#name , update_rate 0 min rejected label ' #%#parent DERIVE type rejected received completed rejected graph_order exim_mailstats sensors graph_category Celsius graph_vlabel �This graph shows the temperature in different ACPI Thermal zones. If there is only one it will usually be the case temperature. graph_info #%#parent M #%#parent thermal_zone0 #%#name x86_pkg_temp label normal graph_data_size , update_rate thermal_zone0 thermal_zone0 thermal_zone1 graph_order normal graph_data_size , update_rate x86_pkg_temp label thermal_zone1 #%#name M #%#parent thermal_zone1 acpi #%#name ACPI Thermal zone temperatures graph_title acpi #%#parent system graph_category --base 1000 -l 0 graph_args uptime in days graph_vlabel uptime #%#name Uptime graph_title no graph_scale uptime #%#name uptime label AREA draw d #%#parent normal graph_data_size , update_rate uptime uptime graph_order uptime --base 1000 graph_args )bits in (-) / out (+) per ${graph_period} graph_vlabel @This graph shows the traffic of the eth1 network interface. Please note that the traffic is shown in bits per second, not bytes. IMPORTANT: On 32-bit systems the data source for this plugin uses 32-bit counters, which makes the plugin unreliable and unsuitable for most 100-Mb/s (or faster) interfaces, where traffic is expected to exceed 50 Mb/s over a 5 minute period. This means that this plugin is unsuitable for most 32-bit production environments. To avoid this problem, use the ip_ plugin instead. There should be no problems on 64-bit systems running 64-bit kernels. graph_info network graph_category #%#parent 0 min received label DERIVE type v #%#parent , update_rate down #%#name 1000000000 max normal graph_data_size no graph down,8,* cdef down down up down up graph_order if_eth1 #%#name DERIVE type v #%#parent bps label 0 min down negative , update_rate :Traffic of the eth1 interface. Maximum speed is 1000 Mb/s. info up #%#name up,8,* cdef normal graph_data_size 1000000000 max up eth1 traffic graph_title if_eth1 /run/user/1001 label _run_user_1001 #%#name � #%#parent , update_rate normal graph_data_size 98 critical 92 warning _run_user_1001 /tmp label � #%#parent , update_rate _dev_loop0 #%#name normal graph_data_size 98 critical 92 warning _dev_loop0 _dev_shm #%#name normal graph_data_size 98 critical 92 warning /dev/shm label � #%#parent , update_rate _dev_shm ^devtmpfs _dev_shm _run _dev_sda3 _dev_sda1 _dev_loop0 _run_user_1001 _run_user_0 _run_user_967 graph_order /dev label devtmpfs #%#name � #%#parent normal graph_data_size , update_rate 98 critical 92 warning devtmpfs df_inode #%#name � #%#parent /boot label , update_rate _dev_sda1 #%#name 92 warning 98 critical normal graph_data_size _dev_sda1 _run_user_0 #%#name normal graph_data_size 98 critical 92 warning /run/user/0 label � #%#parent , update_rate _run_user_0 Inode usage in percent graph_title no graph_scale --upper-limit 100 -l 0 graph_args % graph_vlabel disk graph_category 98 critical 92 warning normal graph_data_size _run_user_967 #%#name , update_rate � #%#parent /run/user/967 label _run_user_967 #%#parent _run #%#name 92 warning 98 critical normal graph_data_size � #%#parent /run label , update_rate _run � #%#parent / label , update_rate _dev_sda3 #%#name 92 warning 98 critical normal graph_data_size _dev_sda3 df_inode disk graph_category 5--base 1000 --lower-limit 0 --upper-limit 100 --rigid graph_args % busy graph_vlabel normal graph_data_size Utilization of the device info loop0_util #%#name , update_rate � #%#parent GAUGE type LINE1 draw loop0 label 0 min loop0_util #%#parent util graph_order loop0 #%#name Disk utilization for /dev/loop0 graph_title no graph_scale normal graph_data_size util #%#name �Utilization of the device in percent. If the time spent for I/O is close to 1000msec for a given second, the device is nearly 100% saturated. info , update_rate Utilization label 0 min LINE1 draw GAUGE type #%#parent util 5--base 1000 --lower-limit 0 --upper-limit 100 --rigid graph_args % busy graph_vlabel disk graph_category � #%#parent loop0 loop0_util sda_util graph_order 400 graph_width , update_rate 0 min sda label LINE1 draw GAUGE type � #%#parent normal graph_data_size sda_util #%#name Utilization of the device info sda_util diskstats_utilization #%#name � #%#parent 5--base 1000 --lower-limit 0 --upper-limit 100 --rigid graph_args % busy graph_vlabel disk graph_category sda #%#name no graph_scale Disk utilization for /dev/sda graph_title normal graph_data_size util #%#name �Utilization of the device in percent. If the time spent for I/O is close to 1000msec for a given second, the device is nearly 100% saturated. info , update_rate Utilization label 0 min LINE1 draw GAUGE type ( #%#parent util util graph_order sda no graph_scale Utilization per device graph_title diskstats_utilization --base 1000 graph_args @This graph shows the traffic of the eth0 network interface. Please note that the traffic is shown in bits per second, not bytes. IMPORTANT: On 32-bit systems the data source for this plugin uses 32-bit counters, which makes the plugin unreliable and unsuitable for most 100-Mb/s (or faster) interfaces, where traffic is expected to exceed 50 Mb/s over a 5 minute period. This means that this plugin is unsuitable for most 32-bit production environments. To avoid this problem, use the ip_ plugin instead. There should be no problems on 64-bit systems running 64-bit kernels. graph_info )bits in (-) / out (+) per ${graph_period} graph_vlabel network graph_category , update_rate DERIVE type ? #%#parent received label 0 min down,8,* cdef no graph 1000000000 max normal graph_data_size down #%#name down #%#parent down up down up graph_order DERIVE type ? #%#parent bps label 0 min down negative , update_rate :Traffic of the eth0 interface. Maximum speed is 1000 Mb/s. info up #%#name up,8,* cdef 1000000000 max normal graph_data_size up if_eth0 #%#name eth0 traffic graph_title if_eth0 normal graph_data_size , update_rate munin html label html #%#name b #%#parent AREASTACK draw html munin graph_category seconds graph_vlabel update #%#name 240 warning 285 critical normal graph_data_size AREASTACK draw b #%#parent munin update label , update_rate update --base 1000 -l 0 graph_args #%#parent iThis graph shows the run time of the four different processes making up a munin-master run. Munin-master is run from cron every 5 minutes and we want each of the programmes in munin-master to complete before the next instance starts. Especially munin-update and munin-graph are time consuming and their run time bears watching. If munin-update uses too long time to run please see the munin-update graph to determine which host is slowing it down. If munin-graph is running too slow you need to get clever (email the munin-users mailing list) unless you can buy a faster computer with better disks to run munin on. graph_info graph #%#name normal graph_data_size 285 critical 240 warning munin graph label b #%#parent AREASTACK draw , update_rate graph normal graph_data_size limits #%#name , update_rate b #%#parent AREASTACK draw munin limits label limits update graph html limits graph_order yes graph_scale Munin processing time graph_title munin_stats #%#name munin_stats errors label COUNTER type � #%#parent , update_rate rcvd #%#name normal graph_data_size 1 warning no graph rcvd #%#parent ,packets in (-) / out (+) per ${graph_period} graph_vlabel --base 1000 graph_args normal graph_data_size txdrop #%#name rxdrop negative , update_rate COUNTER type � #%#parent drops label txdrop network graph_category collisions #%#name normal graph_data_size collisions label � #%#parent COUNTER type , update_rate collisions rcvd negative , update_rate � #%#parent COUNTER type errors label 1 warning normal graph_data_size trans #%#name trans , update_rate � #%#parent COUNTER type drops label no graph normal graph_data_size rxdrop #%#name rxdrop bThis graph shows the amount of errors, packet drops, and collisions on the eth1 network interface. graph_info eth1 errors graph_title if_err_eth1 #%#name .rcvd trans rcvd trans rxdrop txdrop collisions graph_order if_err_eth1 sleeping label � #%#parent AREA draw , update_rate sleeping #%#name !The number of sleeping processes. info normal graph_data_size 0022ff colour sleeping �sleeping idle stopped zombie dead paging uninterruptible runnable processes dead paging idle sleeping uninterruptible stopped runnable zombie processes graph_order processes #%#name Processes graph_title , update_rate � #%#parent LINE1 draw total label c0c0c0 colour normal graph_data_size The total number of processes. info processes #%#name processes uninterruptible label � #%#parent STACK draw , update_rate uninterruptible #%#name 5The number of uninterruptible processes (usually IO). info ffa500 colour normal graph_data_size uninterruptible (This graph shows the number of processes graph_info dead label � #%#parent STACK draw , update_rate dead #%#name The number of dead processes. info ff0000 colour normal graph_data_size dead zombie #%#name WThe number of defunct ('zombie') processes (process terminated and parent not waiting). info 990000 colour normal graph_data_size zombie label STACK draw � #%#parent , update_rate zombie , update_rate idle label � #%#parent STACK draw 4169e1 colour normal graph_data_size idle #%#name 8The number of idle kernel threads (>= 4.2 kernels only). info idle � #%#parent STACK draw stopped label , update_rate *The number of stopped or traced processes. info stopped #%#name normal graph_data_size cc0000 colour stopped processes graph_category --base 1000 -l 0 graph_args Number of processes graph_vlabel #%#parent runnable #%#name 4The number of runnable processes (on the run queue). info 22ff22 colour normal graph_data_size runnable label STACK draw � #%#parent , update_rate runnable 3The number of paging processes (<2.6 kernels only). info paging #%#name 00aaaa colour normal graph_data_size STACK draw � #%#parent paging label , update_rate paging processes [ 0-edge ioat-msix label 0 min - #%#parent DERIVE type , update_rate i91 #%#name 2Interrupt 91, for device(s): 0-edge ioat-msix info normal graph_data_size i91 --base 1000 --logarithmic graph_args .Interrupt 24, for device(s): 0-edge dmar0 info i24 #%#name normal graph_data_size DERIVE type - #%#parent 0 min 0-edge dmar0 label , update_rate i24 , update_rate 0-edge ioat-msix label 0 min DERIVE type - #%#parent normal graph_data_size i92 #%#name 2Interrupt 92, for device(s): 0-edge ioat-msix info i92 <Interrupt DFR, for device(s): Deferred Error APIC interrupts info iDFR #%#name normal graph_data_size - #%#parent DERIVE type 0 min Deferred Error APIC interrupts label , update_rate iDFR i49 #%#name 9Interrupt 49, for device(s): 12-edge megasas0-msix12 info normal graph_data_size 0 min 12-edge megasas0-msix12 label DERIVE type - #%#parent , update_rate i49 Shows the number of different IRQs received by the kernel. High disk or network traffic can cause a high number of interrupts (with good hardware and drivers this will be less so). Sudden high interrupt activity with no associated higher system activity is not normal. graph_info iIWI #%#name 1Interrupt IWI, for device(s): IRQ work interrupts info normal graph_data_size IRQ work interrupts label 0 min - #%#parent DERIVE type , update_rate iIWI i58 #%#name 4Interrupt 58, for device(s): 5-edge eth0-TxRx-4 info normal graph_data_size 0 min 5-edge eth0-TxRx-4 label DERIVE type - #%#parent , update_rate i58 normal graph_data_size 6Interrupt CAL, for device(s): Function call interrupts info iCAL #%#name , update_rate DERIVE type - #%#parent 0 min Function call interrupts label iCAL Individual interrupts graph_title normal graph_data_size i18 #%#name 4Interrupt 18, for device(s): 18-fasteoi i801_smbus info , update_rate 0 min 18-fasteoi i801_smbus label DERIVE type - #%#parent i18 normal graph_data_size 4Interrupt 26, for device(s): 0-edge PCIe bwctrl info i26 #%#name , update_rate - #%#parent DERIVE type 0-edge PCIe bwctrl label 0 min i26 - #%#parent DERIVE type 7-edge eth1-TxRx-6 label 0 min , update_rate 4Interrupt 70, for device(s): 7-edge eth1-TxRx-6 info i70 #%#name normal graph_data_size i70 4Interrupt 69, for device(s): 6-edge eth1-TxRx-5 info i69 #%#name normal graph_data_size - #%#parent DERIVE type 0 min 6-edge eth1-TxRx-5 label , update_rate i69 0-edge ioat-msix label 0 min DERIVE type - #%#parent , update_rate i76 #%#name 2Interrupt 76, for device(s): 0-edge ioat-msix info normal graph_data_size i76 , update_rate 0 min 14-edge megasas0-msix14 label DERIVE type - #%#parent normal graph_data_size i51 #%#name 9Interrupt 51, for device(s): 14-edge megasas0-msix14 info i51 i53 #%#name -Interrupt 53, for device(s): 0-edge eth0 info normal graph_data_size 0 min 0-edge eth0 label DERIVE type - #%#parent , update_rate i53 i8 #%#name ,Interrupt 8, for device(s): 8-edge rtc0 info normal graph_data_size 0 min 8-edge rtc0 label - #%#parent DERIVE type , update_rate i8 normal graph_data_size 2Interrupt 86, for device(s): 0-edge ioat-msix info i86 #%#name , update_rate DERIVE type - #%#parent 0-edge ioat-msix label 0 min i86 normal graph_data_size i80 #%#name 2Interrupt 80, for device(s): 0-edge ioat-msix info , update_rate 0-edge ioat-msix label 0 min - #%#parent DERIVE type i80 normal graph_data_size 7Interrupt 39, for device(s): 2-edge megasas0-msix2 info i39 #%#name , update_rate DERIVE type - #%#parent 2-edge megasas0-msix2 label 0 min i39 i52 #%#name 9Interrupt 52, for device(s): 15-edge megasas0-msix15 info normal graph_data_size 15-edge megasas0-msix15 label 0 min - #%#parent DERIVE type , update_rate i52 normal graph_data_size 2Interrupt 84, for device(s): 0-edge ioat-msix info i84 #%#name , update_rate - #%#parent DERIVE type 0-edge ioat-msix label 0 min i84 , update_rate 0 min 0-edge ioat-msix label - #%#parent DERIVE type normal graph_data_size i74 #%#name 2Interrupt 74, for device(s): 0-edge ioat-msix info i74 normal graph_data_size iTRM #%#name 6Interrupt TRM, for device(s): Thermal event interrupts info , update_rate Thermal event interrupts label 0 min - #%#parent DERIVE type iTRM , update_rate - #%#parent DERIVE type 0-edge ioat-msix label 0 min normal graph_data_size 2Interrupt 87, for device(s): 0-edge ioat-msix info i87 #%#name i87 DERIVE type - #%#parent 0-edge ioat-msix label 0 min , update_rate 2Interrupt 77, for device(s): 0-edge ioat-msix info i77 #%#name normal graph_data_size i77 , update_rate 5-edge eth1-TxRx-4 label 0 min - #%#parent DERIVE type normal graph_data_size i68 #%#name 4Interrupt 68, for device(s): 5-edge eth1-TxRx-4 info i68 , update_rate - #%#parent DERIVE type 6-edge megasas0-msix6 label 0 min normal graph_data_size 7Interrupt 43, for device(s): 6-edge megasas0-msix6 info i43 #%#name i43 , update_rate 0 min 4-edge megasas0-msix4 label - #%#parent DERIVE type normal graph_data_size i41 #%#name 7Interrupt 41, for device(s): 4-edge megasas0-msix4 info i41 normal graph_data_size iNPI #%#name ;Interrupt NPI, for device(s): Nested posted-interrupt event info , update_rate 0 min Nested posted-interrupt event label DERIVE type - #%#parent iNPI APIC ICR read retries label 0 min DERIVE type - #%#parent , update_rate iRTR #%#name 3Interrupt RTR, for device(s): APIC ICR read retries info normal graph_data_size iRTR Threshold APIC interrupts label 0 min DERIVE type - #%#parent , update_rate iTHR #%#name 7Interrupt THR, for device(s): Threshold APIC interrupts info normal graph_data_size iTHR normal graph_data_size 7Interrupt 38, for device(s): 1-edge megasas0-msix1 info i38 #%#name , update_rate DERIVE type - #%#parent 0 min 1-edge megasas0-msix1 label i38 normal graph_data_size i42 #%#name 7Interrupt 42, for device(s): 5-edge megasas0-msix5 info , update_rate 0 min 5-edge megasas0-msix5 label - #%#parent DERIVE type i42 6Interrupt MCE, for device(s): Machine check exceptions info iMCE #%#name normal graph_data_size DERIVE type - #%#parent Machine check exceptions label 0 min , update_rate iMCE #%#parent interrupts / ${graph_period} graph_vlabel iRES #%#name 5Interrupt RES, for device(s): Rescheduling interrupts info normal graph_data_size 0 min Rescheduling interrupts label - #%#parent DERIVE type , update_rate iRES i33 #%#name 4Interrupt 33, for device(s): 0-edge PCIe bwctrl info normal graph_data_size 0-edge PCIe bwctrl label 0 min DERIVE type - #%#parent , update_rate i33 i31 #%#name 4Interrupt 31, for device(s): 0-edge PCIe bwctrl info normal graph_data_size 0 min 0-edge PCIe bwctrl label DERIVE type - #%#parent , update_rate i31 i62 #%#name ;Interrupt 62, for device(s): 0-edge ahci[0000:00:1f.2] info normal graph_data_size 0-edge ahci[0000:00:1f.2] label 0 min DERIVE type - #%#parent , update_rate i62 0 min 6-edge eth0-TxRx-5 label DERIVE type - #%#parent , update_rate i59 #%#name 4Interrupt 59, for device(s): 6-edge eth0-TxRx-5 info normal graph_data_size i59 , update_rate DERIVE type - #%#parent 0 min 0-edge eth1 label normal graph_data_size -Interrupt 63, for device(s): 0-edge eth1 info i63 #%#name i63 DERIVE type - #%#parent Spurious interrupts label 0 min , update_rate 1Interrupt SPU, for device(s): Spurious interrupts info iSPU #%#name normal graph_data_size iSPU 9Interrupt 48, for device(s): 11-edge megasas0-msix11 info i48 #%#name normal graph_data_size - #%#parent DERIVE type 0 min 11-edge megasas0-msix11 label , update_rate i48 iLOC #%#name 4Interrupt LOC, for device(s): Local timer interrupts info normal graph_data_size Local timer interrupts label 0 min - #%#parent DERIVE type , update_rate iLOC normal graph_data_size i61 #%#name 4Interrupt 61, for device(s): 8-edge eth0-TxRx-7 info , update_rate 0 min 8-edge eth0-TxRx-7 label DERIVE type - #%#parent i61 iNMI #%#name 5Interrupt NMI, for device(s): Non-maskable interrupts info normal graph_data_size Non-maskable interrupts label 0 min - #%#parent DERIVE type , update_rate iNMI normal graph_data_size 7Interrupt 46, for device(s): 9-edge megasas0-msix9 info i46 #%#name , update_rate DERIVE type - #%#parent 9-edge megasas0-msix9 label 0 min i46 normal graph_data_size i57 #%#name 4Interrupt 57, for device(s): 4-edge eth0-TxRx-3 info , update_rate 4-edge eth0-TxRx-3 label 0 min DERIVE type - #%#parent i57 , update_rate 0 min 3-edge megasas0-msix3 label DERIVE type - #%#parent normal graph_data_size i40 #%#name 7Interrupt 40, for device(s): 3-edge megasas0-msix3 info i40 4Interrupt 55, for device(s): 2-edge eth0-TxRx-1 info i55 #%#name normal graph_data_size - #%#parent DERIVE type 2-edge eth0-TxRx-1 label 0 min , update_rate i55 7Interrupt 44, for device(s): 7-edge megasas0-msix7 info i44 #%#name normal graph_data_size - #%#parent DERIVE type 0 min 7-edge megasas0-msix7 label , update_rate i44 normal graph_data_size 4Interrupt 30, for device(s): 0-edge PCIe bwctrl info i30 #%#name , update_rate DERIVE type - #%#parent 0-edge PCIe bwctrl label 0 min i30 #Posted-interrupt notification event label 0 min DERIVE type - #%#parent , update_rate iPIN #%#name AInterrupt PIN, for device(s): Posted-interrupt notification event info normal graph_data_size iPIN - #%#parent DERIVE type 1-edge eth1-TxRx-0 label 0 min , update_rate 4Interrupt 64, for device(s): 1-edge eth1-TxRx-0 info i64 #%#name normal graph_data_size i64 normal graph_data_size iMIS #%#name , update_rate DERIVE type - #%#parent MIS label 0 min iMIS 0 min Posted-interrupt wakeup event label DERIVE type - #%#parent , update_rate iPIW #%#name ;Interrupt PIW, for device(s): Posted-interrupt wakeup event info normal graph_data_size iPIW DERIVE type - #%#parent 3-edge eth1-TxRx-2 label 0 min , update_rate 4Interrupt 66, for device(s): 3-edge eth1-TxRx-2 info i66 #%#name normal graph_data_size i66 DERIVE type - #%#parent 0 min 0-edge ioat-msix label , update_rate 2Interrupt 79, for device(s): 0-edge ioat-msix info i79 #%#name normal graph_data_size i79 normal graph_data_size 4Interrupt 60, for device(s): 7-edge eth0-TxRx-6 info i60 #%#name , update_rate DERIVE type - #%#parent 0 min 7-edge eth0-TxRx-6 label i60 , update_rate DERIVE type - #%#parent 0 min 0-edge ioat-msix label normal graph_data_size 2Interrupt 89, for device(s): 0-edge ioat-msix info i89 #%#name i89 i65 #%#name 4Interrupt 65, for device(s): 2-edge eth1-TxRx-1 info normal graph_data_size 0 min 2-edge eth1-TxRx-1 label DERIVE type - #%#parent , update_rate i65 2Interrupt 90, for device(s): 0-edge ioat-msix info i90 #%#name normal graph_data_size DERIVE type - #%#parent 0-edge ioat-msix label 0 min , update_rate i90 normal graph_data_size ,Interrupt 9, for device(s): 9-fasteoi acpi info i9 #%#name , update_rate DERIVE type - #%#parent 9-fasteoi acpi label 0 min i9 , update_rate - #%#parent DERIVE type 0-edge megasas0-msix0 label 0 min normal graph_data_size 7Interrupt 37, for device(s): 0-edge megasas0-msix0 info i37 #%#name i37 normal graph_data_size -Interrupt 0, for device(s): 2-edge timer info i0 #%#name , update_rate - #%#parent DERIVE type 0 min 2-edge timer label i0 DERIVE type - #%#parent 0 min 0-edge ioat-msix label , update_rate 2Interrupt 88, for device(s): 0-edge ioat-msix info i88 #%#name normal graph_data_size i88 23-fasteoi ehci_hcd:usb2 label 0 min DERIVE type - #%#parent , update_rate i23 #%#name 7Interrupt 23, for device(s): 23-fasteoi ehci_hcd:usb2 info normal graph_data_size i23 i78 #%#name 2Interrupt 78, for device(s): 0-edge ioat-msix info normal graph_data_size 0 min 0-edge ioat-msix label - #%#parent DERIVE type , update_rate i78 normal graph_data_size iERR #%#name , update_rate ERR label 0 min DERIVE type - #%#parent iERR , update_rate 4-edge eth1-TxRx-3 label 0 min - #%#parent DERIVE type normal graph_data_size i67 #%#name 4Interrupt 67, for device(s): 4-edge eth1-TxRx-3 info i67 normal graph_data_size 7Interrupt 16, for device(s): 16-fasteoi ehci_hcd:usb1 info i16 #%#name , update_rate - #%#parent DERIVE type 0 min 16-fasteoi ehci_hcd:usb1 label i16 0 min !Performance monitoring interrupts label DERIVE type - #%#parent , update_rate iPMI #%#name ?Interrupt PMI, for device(s): Performance monitoring interrupts info normal graph_data_size iPMI DERIVE type - #%#parent 0 min 0-edge PCIe bwctrl label , update_rate 4Interrupt 28, for device(s): 0-edge PCIe bwctrl info i28 #%#name normal graph_data_size i28 system graph_category normal graph_data_size i81 #%#name 2Interrupt 81, for device(s): 0-edge ioat-msix info , update_rate 0-edge ioat-msix label 0 min - #%#parent DERIVE type i81 normal graph_data_size i71 #%#name 4Interrupt 71, for device(s): 8-edge eth1-TxRx-7 info , update_rate 8-edge eth1-TxRx-7 label 0 min - #%#parent DERIVE type i71 - #%#parent DERIVE type Machine check polls label 0 min , update_rate 1Interrupt MCP, for device(s): Machine check polls info iMCP #%#name normal graph_data_size iMCP , update_rate 0 min 13-edge megasas0-msix13 label DERIVE type - #%#parent normal graph_data_size i50 #%#name 9Interrupt 50, for device(s): 13-edge megasas0-msix13 info i50 9Interrupt 47, for device(s): 10-edge megasas0-msix10 info i47 #%#name normal graph_data_size - #%#parent DERIVE type 10-edge megasas0-msix10 label 0 min , update_rate i47 normal graph_data_size i56 #%#name 4Interrupt 56, for device(s): 3-edge eth0-TxRx-2 info , update_rate 3-edge eth0-TxRx-2 label 0 min - #%#parent DERIVE type i56 , update_rate 0 min 8-edge megasas0-msix8 label - #%#parent DERIVE type normal graph_data_size i45 #%#name 7Interrupt 45, for device(s): 8-edge megasas0-msix8 info i45 0 min 1-edge eth0-TxRx-0 label DERIVE type - #%#parent , update_rate i54 #%#name 4Interrupt 54, for device(s): 1-edge eth0-TxRx-0 info normal graph_data_size i54 2Interrupt 82, for device(s): 0-edge ioat-msix info i82 #%#name normal graph_data_size - #%#parent DERIVE type 0-edge ioat-msix label 0 min , update_rate i82 irqstats #%#name .Interrupt 72, for device(s): 1-edge dmar1 info i72 #%#name normal graph_data_size - #%#parent DERIVE type 0 min 1-edge dmar1 label , update_rate i72 �i0 i8 i9 i16 i18 i23 i24 i26 i28 i30 i31 i33 i37 i38 i39 i40 i41 i42 i43 i44 i45 i46 i47 i48 i49 i50 i51 i52 i53 i54 i55 i56 i57 i58 i59 i60 i61 i62 i63 i64 i65 i66 i67 i68 i69 i70 i71 i72 i74 i76 i77 i78 i79 i80 i81 i82 i84 i86 i87 i88 i89 i90 i91 i92 iNMI iLOC iSPU iPMI iIWI iRTR iRES iCAL iTLB iTRM iTHR iDFR iMCE iMCP iERR iMIS iPIN iNPI iPIW i0 i8 i9 i16 i18 i23 i24 i26 i28 i30 i31 i33 i37 i38 i39 i40 i41 i42 i43 i44 i45 i46 i47 i48 i49 i50 i51 i52 i53 i54 i55 i56 i57 i58 i59 i60 i61 i62 i63 i64 i65 i66 i67 i68 i69 i70 i71 i72 i74 i76 i77 i78 i79 i80 i81 i82 i84 i86 i87 i88 i89 i90 i91 i92 iNMI iLOC iSPU iPMI iIWI iRTR iRES iCAL iTLB iTRM iTHR iDFR iMCE iMCP iERR iMIS iPIN iNPI iPIW graph_order iTLB #%#name ,Interrupt TLB, for device(s): TLB shootdowns info normal graph_data_size 0 min TLB shootdowns label DERIVE type - #%#parent , update_rate iTLB irqstats recv sent graph_order mysql_bytes #%#name MySQL throughput graph_title transfer rate label 0 min LINE2 draw DERIVE type s #%#parent , update_rate recv negative sent #%#name normal graph_data_size 80000000 max sent no graph 80000000 max normal graph_data_size recv #%#name , update_rate DERIVE type LINE2 draw s #%#parent 0 min transfer rate label recv mysql graph_category --base 1024 graph_args 1bytes received (-) / sent (+) per ${graph_period} graph_vlabel �Note that this is a old plugin which is no longer installed by default. It is retained for compatability with old installations. graph_info #%#parent mysql_bytes tty #%#name 00FF00 colour normal graph_data_size tty label AREASTACK draw � #%#parent , update_rate tty %3.0lf graph_printf #%#parent system graph_category --base 1000 -l 0 graph_args Users graph_vlabel 'Users logged in by indeterminate method info other #%#name normal graph_data_size FF0000 colour � #%#parent Other users label , update_rate other users #%#name AREASTACK draw � #%#parent pts label , update_rate pts #%#name normal graph_data_size 00FFFF colour pts no graph_scale Logged in users graph_title normal graph_data_size 000000 colour X #%#name Users logged in on an X display info , update_rate X displays label AREASTACK draw � #%#parent X tty pty pts X other graph_order , update_rate � #%#parent AREASTACK draw pty label 0000FF colour normal graph_data_size pty #%#name pty users #%#parent mysql graph_category slow queries / ${graph_period} graph_vlabel �Note that this is a old plugin which is no longer installed by default. It is retained for compatability with old installations. graph_info --base 1000 -l 0 graph_args MySQL slow queries graph_title mysql_slowqueries #%#name queries graph_order 500000 max normal graph_data_size queries #%#name , update_rate slow queries label 0 min DERIVE type � #%#parent queries mysql_slowqueries #%#parent --base 1000 -l 0 graph_args HThis graph shows the number of forks (new processes started) per second. graph_info forks / ${graph_period} graph_vlabel processes graph_category forks #%#name Fork rate graph_title 100000 max normal graph_data_size forks #%#name The number of forks per second. info , update_rate forks label 0 min � #%#parent DERIVE type forks forks graph_order forks queued mails label � #%#parent AREA draw , update_rate mails #%#name normal graph_data_size 00AA00 colour 0:200 critical 0:100 warning mails #%#parent mails in queue graph_vlabel --base 1000 -l 0 graph_args 0022FF colour normal graph_data_size 0:100 warning 0:200 critical frozen #%#name , update_rate frozen mails label STACK draw � #%#parent frozen exim graph_category Exim Mailqueue graph_title exim_mailqueue #%#name mails frozen graph_order exim_mailqueue _dev_sda3 #%#name / label #%#parent , update_rate normal graph_data_size 92 warning 98 critical _dev_sda3 normal graph_data_size 92 warning 98 critical _run #%#name , update_rate /run label #%#parent _run /run/user/967 label _run_user_967 #%#name #%#parent normal graph_data_size , update_rate 98 critical 92 warning _run_user_967 #%#parent --upper-limit 100 -l 0 graph_args % graph_vlabel disk graph_category df #%#name , update_rate /boot label #%#parent normal graph_data_size 92 warning 98 critical _dev_sda1 #%#name _dev_sda1 normal graph_data_size , update_rate 92 warning 98 critical _run_user_0 #%#name /run/user/0 label #%#parent _run_user_0 Disk usage in percent graph_title no graph_scale U_dev_shm _run _dev_sda3 _dev_sda1 _dev_loop0 _run_user_1001 _run_user_0 _run_user_967 graph_order _dev_loop0 #%#name normal graph_data_size 92 warning 98 critical /tmp label #%#parent , update_rate _dev_loop0 _dev_shm #%#name normal graph_data_size 92 warning 98 critical /dev/shm label #%#parent , update_rate _dev_shm _run_user_1001 #%#name /run/user/1001 label #%#parent , update_rate normal graph_data_size 92 warning 98 critical _run_user_1001 df , update_rate open files label h #%#parent normal graph_data_size 8485502273906394112 warning 9038904596117680128 critical used #%#name #The number of currently open files. info used File table usage graph_title open_files #%#name used graph_order #%#parent system graph_category number of open files graph_vlabel /This graph monitors the Linux open files table. graph_info --base 1000 -l 0 graph_args open_files wait #%#name normal graph_data_size 500000 max GAUGE type | #%#parent running label , update_rate wait wait sleep graph_order vmstat #%#name VMstat graph_title processes graph_category --base 1000 -l 0 graph_args process states graph_vlabel #%#parent , update_rate | #%#parent GAUGE type I/O sleep label 500000 max normal graph_data_size sleep #%#name sleep vmstat (active passive failed resets established graph_order � #%#parent GAUGE type established label , update_rate )The number of currently open connections. info established #%#name normal graph_data_size established netstat #%#name Netstat, combined graph_title IThis graph shows the TCP activity of all the network interfaces combined. graph_info , update_rate � #%#parent DERIVE type 0 min failed label 50000 max normal graph_data_size 8The number of failed TCP connection attempts per second. info failed #%#name failed 50000 max normal graph_data_size $The number of TCP connection resets. info resets #%#name , update_rate � #%#parent DERIVE type resets label 0 min resets 0 min passive label DERIVE type � #%#parent , update_rate passive #%#name .The number of passive TCP openings per second. info normal graph_data_size 50000 max passive )--units=si -l 1 --base 1000 --logarithmic graph_args TCP connections graph_vlabel , update_rate � #%#parent DERIVE type active label 0 min 50000 max normal graph_data_size -The number of active TCP openings per second. info active #%#name active network graph_category second graph_period #%#parent netstat #%#parent received #%#name normal graph_data_size 0 min Received label � #%#parent DERIVE type AREA draw , update_rate received network graph_category --base 1000 -l 0 graph_args Packets/${graph_period} graph_vlabel fw_packets #%#name � #%#parent LINE2 draw DERIVE type 0 min Forwarded label , update_rate forwarded #%#name normal graph_data_size forwarded Firewall Throughput graph_title received forwarded graph_order fw_packets normal graph_data_size 500000 max select #%#name , update_rate DERIVE type AREA draw � #%#parent 0 min select label select normal graph_data_size 500000 max delete #%#name , update_rate DERIVE type STACK draw � #%#parent delete label 0 min delete �Note that this is a old plugin which is no longer installed by default. It is retained for compatability with old installations. graph_info , update_rate 0 min cache_hits label � #%#parent DERIVE type STACK draw normal graph_data_size 500000 max cache_hits #%#name cache_hits total graph_total mysql_queries #%#name MySQL queries graph_title .select delete insert update replace cache_hits graph_order #%#parent insert #%#name normal graph_data_size 500000 max insert label 0 min STACK draw DERIVE type � #%#parent , update_rate insert mysql graph_category --base 1000 graph_args 500000 max normal graph_data_size update #%#name , update_rate � #%#parent STACK draw DERIVE type 0 min update label update queries / ${graph_period} graph_vlabel replace #%#name 500000 max normal graph_data_size 0 min replace label DERIVE type STACK draw � #%#parent , update_rate replace mysql_queries #%#parent load graph_order load #%#name Load average graph_title no graph_scale system graph_category --base 1000 -l 0 graph_args load graph_vlabel sThe load average of the machine describes how many processes are in the run-queue (scheduled to run "immediately"). graph_info #%#parent , update_rate B #%#parent load label normal graph_data_size 5 minute load average info load #%#name load load MySQL threads graph_title mysql_threads #%#name threads graph_order normal graph_data_size , update_rate U #%#parent threads #%#name mysql threads label threads #%#parent �Note that this is a old plugin which is no longer installed by default. It is retained for compatability with old installations. graph_info threads graph_vlabel --base 1000 graph_args mysql graph_category mysql_threads #%#parent processes graph_category number of threads graph_vlabel 'This graph shows the number of threads. graph_info threads #%#name Number of threads graph_title , update_rate threads label f #%#parent normal graph_data_size threads #%#name The current number of threads. info threads threads graph_order threads Inode table usage graph_title open_inodes #%#name normal graph_data_size used #%#name $The number of currently open inodes. info , update_rate open inodes label w #%#parent used inode table size label w #%#parent , update_rate max #%#name OThe size of the system inode table. This is dynamically adjusted by the kernel. info normal graph_data_size max used max graph_order #%#parent number of open inodes graph_vlabel /This graph monitors the Linux open inode table. graph_info --base 1000 -l 0 graph_args system graph_category open_inodes http___localhost_ graph_order HTTP loadtime of a page graph_title http_loadtime #%#name )This graph shows the load time in seconds graph_info Load time in seconds graph_vlabel --base 1000 -l 0 graph_args http___localhost_ #%#name page load time info normal graph_data_size http://localhost/ label � #%#parent , update_rate http___localhost_ network graph_category #%#parent http_loadtime entropy graph_order Available entropy graph_title no graph_scale entropy #%#name � #%#parent entropy label , update_rate [The number of random bytes available. This is typically used by cryptographic applications. info entropy #%#name normal graph_data_size entropy entropy (bytes) graph_vlabel ?This graph shows the amount of entropy available in the system. graph_info --base 1000 -l 0 graph_args system graph_category #%#parent entropy 400 graph_width 'loop0_rdio loop0_wrio sda_rdio sda_wrio graph_order diskstats_iops #%#name --base 1000 graph_args Units read (-) / write (+) graph_vlabel disk graph_category .Average Request Size in kilobytes (1000 based) info avgwrrqsz #%#name normal graph_data_size � #%#parent LINE1 draw GAUGE type 0 min Req Size (KB) label avgrdrqsz negative , update_rate avgwrrqsz � #%#parent LINE1 draw GAUGE type � #%#parent IO/sec label 0 min rdio negative , update_rate wrio #%#name normal graph_data_size wrio rdio #%#name normal graph_data_size no graph 0 min dummy label � #%#parent GAUGE type LINE1 draw , update_rate rdio �This graph shows the number of IO operations pr second and the average size of these requests. Lots of small requests should result in in lower throughput (separate graph) and higher service time (separate graph). Please note that starting with munin-node 2.0 the divisor for K is 1000 instead of 1024 which it was prior to 2.0 beta 3. This is because the base for this graph is 1000 not 1024. graph_info rdio wrio avgrdrqsz avgwrrqsz graph_order sda #%#name IOs for /dev/sda graph_title normal graph_data_size no graph avgrdrqsz #%#name , update_rate dummy label 0 min � #%#parent LINE1 draw GAUGE type avgrdrqsz sda Disk IOs per device graph_title �This graph shows the number of IO operations pr second and the average size of these requests. Lots of small requests should result in in lower throughput (separate graph) and higher service time (separate graph). Please note that starting with munin-node 2.0 the divisor for K is 1000 instead of 1024 which it was prior to 2.0 beta 3. This is because the base for this graph is 1000 not 1024. graph_info , update_rate � #%#parent LINE1 draw GAUGE type dummy label 0 min no graph normal graph_data_size rdio #%#name rdio loop0 #%#name IOs for /dev/loop0 graph_title no graph normal graph_data_size avgrdrqsz #%#name , update_rate LINE1 draw GAUGE type � #%#parent 0 min dummy label avgrdrqsz rdio wrio avgrdrqsz avgwrrqsz graph_order GAUGE type LINE1 draw � #%#parent Req Size (KB) label 0 min avgrdrqsz negative , update_rate .Average Request Size in kilobytes (1000 based) info avgwrrqsz #%#name normal graph_data_size avgwrrqsz � #%#parent disk graph_category --base 1000 graph_args Units read (-) / write (+) graph_vlabel rdio negative , update_rate LINE1 draw GAUGE type � #%#parent 0 min IO/sec label normal graph_data_size wrio #%#name wrio loop0 normal graph_data_size loop0_wrio #%#name , update_rate loop0_rdio negative loop0 label 0 min LINE1 draw GAUGE type � #%#parent loop0_wrio 0 min sda label � #%#parent LINE1 draw GAUGE type , update_rate sda_rdio #%#name normal graph_data_size no graph sda_rdio normal graph_data_size sda_wrio #%#name sda_rdio negative , update_rate � #%#parent LINE1 draw GAUGE type 0 min sda label sda_wrio disk graph_category --base 1000 graph_args (IOs/${graph_period} read (-) / write (+) graph_vlabel #%#parent GAUGE type LINE1 draw � #%#parent loop0 label 0 min , update_rate loop0_rdio #%#name no graph normal graph_data_size loop0_rdio diskstats_iops , update_rate AREA draw Z #%#parent apps label COLOUR0 colour normal graph_data_size 'Memory used by user-space applications. info apps #%#name apps , update_rate shmem label Z #%#parent STACK draw COLOUR9 colour normal graph_data_size shmem #%#name )Shared Memory (SYSV SHM segments, tmpfs). info shmem Z #%#parent STACK draw swap_cache label , update_rate gA piece of memory that keeps track of pages that have been fetched from swap but not yet been modified. info swap_cache #%#name COLOUR2 colour normal graph_data_size swap_cache vmalloc_used #%#name 'VMalloc' (kernel) memory used info normal graph_data_size COLOUR8 colour vmalloc_used label LINE2 draw Z #%#parent , update_rate vmalloc_used #%#parent normal graph_data_size COLOUR11 colour mapped #%#name All mmap()ed pages. info , update_rate mapped label LINE2 draw Z #%#parent mapped STACK draw Z #%#parent cache label , update_rate &Parked file data (file content) cache. info cached #%#name normal graph_data_size COLOUR4 colour cached , update_rate swap label STACK draw Z #%#parent COLOUR7 colour normal graph_data_size swap #%#name Swap space used. info swap Bytes graph_vlabel , update_rate active label LINE2 draw Z #%#parent COLOUR12 colour normal graph_data_size active #%#name @Memory recently used. Not reclaimed unless absolutely necessary. info active *--base 1024 -l 0 --upper-limit 66947289088 graph_args , update_rate Z #%#parent STACK draw slab_cache label normal graph_data_size COLOUR3 colour LMemory used by the kernel (major users are caches like inode, dentry, etc). info slab #%#name slab buffers label Z #%#parent STACK draw , update_rate buffers #%#name WBlock device (e.g. harddisk) cache. Also where "dirty" blocks are stored until written. info COLOUR5 colour normal graph_data_size buffers , update_rate page_tables label STACK draw Z #%#parent normal graph_data_size COLOUR1 colour page_tables #%#name AMemory used to map between virtual and physical memory addresses. info page_tables system graph_category Memory usage graph_title memory #%#name , update_rate committed label LINE2 draw Z #%#parent normal graph_data_size COLOUR10 colour committed #%#name dThe amount of memory allocated to programs. Overcommitting is normal, but may indicate memory leaks. info committed ;Wasted memory. Memory that is not used for anything at all. info free #%#name normal graph_data_size COLOUR6 colour STACK draw Z #%#parent unused label , update_rate free �apps page_tables per_cpu swap_cache slab shmem cached buffers free swap apps buffers swap cached free shmem slab swap_cache page_tables per_cpu vmalloc_used committed mapped active inactive graph_order Memory not currently used. info inactive #%#name normal graph_data_size COLOUR15 colour LINE2 draw Z #%#parent inactive label , update_rate inactive Per CPU allocations info per_cpu #%#name COLOUR20 colour normal graph_data_size STACK draw Z #%#parent per_cpu label , update_rate per_cpu 2This graph shows what the machine uses memory for. graph_info memory ]system user nice idle iowait irq softirq system user nice idle iowait irq softirq steal guest graph_order cpu #%#name no graph_scale CPU usage graph_title normal graph_data_size user #%#name -CPU time spent by normal programs and daemons info , update_rate 0 min user label STACK draw DERIVE type � #%#parent user 'This graph shows how CPU time is spent. graph_info , update_rate STACK draw DERIVE type � #%#parent idle label 0 min normal graph_data_size Idle CPU time info idle #%#name idle steal #%#name ZThe time that a virtual CPU had runnable tasks, but the virtual CPU itself was not running info normal graph_data_size 0 min steal label DERIVE type STACK draw � #%#parent , update_rate steal system graph_category #CPU time spent by nice(1)d programs info nice #%#name normal graph_data_size DERIVE type STACK draw � #%#parent nice label 0 min , update_rate nice iowait label 0 min DERIVE type STACK draw � #%#parent , update_rate iowait #%#name UCPU time spent waiting for I/O operations to finish when there is nothing else to do. info normal graph_data_size iowait 1CPU time spent by the kernel in system activities info system #%#name normal graph_data_size � #%#parent AREA draw DERIVE type system label 0 min , update_rate system "CPU time spent handling interrupts info irq #%#name normal graph_data_size DERIVE type STACK draw � #%#parent irq label 0 min , update_rate irq 1--base 1000 -r --lower-limit 0 --upper-limit 2400 graph_args % graph_vlabel second graph_period #%#parent , update_rate DERIVE type STACK draw � #%#parent 0 min softirq label normal graph_data_size ,CPU time spent handling "batched" interrupts info softirq #%#name softirq normal graph_data_size guest #%#name gThe time spent running a virtual CPU for guest operating systems under the control of the Linux kernel. info , update_rate 0 min guest label DERIVE type STACK draw � #%#parent guest cpu free graph_order Bytes free label 0 min i #%#parent GAUGE type , update_rate free #%#name normal graph_data_size 1073741824: critical 2147483648: warning free mysql_innodb #%#name MySQL InnoDB free tablespace graph_title mysql graph_category --base 1024 graph_args Bytes graph_vlabel #Free bytes in the InnoDB tablespace graph_info #%#parent mysql_innodb �cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7 cpu8 cpu9 cpu10 cpu11 cpu12 cpu13 cpu14 cpu15 cpu16 cpu17 cpu18 cpu19 cpu20 cpu21 cpu22 cpu23 graph_order CPU 13 label 1200000 min GAUGE type ~ #%#parent , update_rate cpu13 #%#name normal graph_data_size 2860000 max cpu13,1000,* cdef cpu13 cpu1,1000,* cdef normal graph_data_size 2860000 max cpu1 #%#name , update_rate ~ #%#parent GAUGE type CPU 1 label 1200000 min cpu1 cpuspeed #%#name , update_rate GAUGE type ~ #%#parent CPU 5 label 1200000 min cpu5,1000,* cdef normal graph_data_size 2860000 max cpu5 #%#name cpu5 ~ #%#parent GAUGE type 1200000 min CPU 7 label , update_rate cpu7 #%#name cpu7,1000,* cdef normal graph_data_size 2860000 max cpu7 , update_rate ~ #%#parent GAUGE type CPU 23 label 1200000 min cpu23,1000,* cdef 2860000 max normal graph_data_size cpu23 #%#name cpu23 cpu3 #%#name 2860000 max normal graph_data_size cpu3,1000,* cdef CPU 3 label 1200000 min GAUGE type ~ #%#parent , update_rate cpu3 GAUGE type ~ #%#parent 1200000 min CPU 4 label , update_rate cpu4 #%#name cpu4,1000,* cdef normal graph_data_size 2860000 max cpu4 , update_rate CPU 2 label 1200000 min GAUGE type ~ #%#parent 2860000 max normal graph_data_size cpu2,1000,* cdef cpu2 #%#name cpu2 , update_rate CPU 16 label 1200000 min GAUGE type ~ #%#parent normal graph_data_size 2860000 max cpu16,1000,* cdef cpu16 #%#name cpu16 normal graph_data_size 2860000 max cpu6,1000,* cdef cpu6 #%#name , update_rate 1200000 min CPU 6 label ~ #%#parent GAUGE type cpu6 Hz graph_vlabel system graph_category #%#parent , update_rate GAUGE type ~ #%#parent 1200000 min CPU 20 label cpu20,1000,* cdef normal graph_data_size 2860000 max cpu20 #%#name cpu20 GAUGE type ~ #%#parent CPU 18 label 1200000 min , update_rate cpu18 #%#name cpu18,1000,* cdef 2860000 max normal graph_data_size cpu18 CPU frequency scaling graph_title , update_rate 1200000 min CPU 15 label GAUGE type ~ #%#parent 2860000 max normal graph_data_size cpu15,1000,* cdef cpu15 #%#name cpu15 cpu19,1000,* cdef normal graph_data_size 2860000 max cpu19 #%#name , update_rate ~ #%#parent GAUGE type CPU 19 label 1200000 min cpu19 �This graph shows the current speed of the CPU at the time of the data retrieval (not its average). This is a limitiation of the 'intel_pstate' driver. graph_info , update_rate CPU 14 label 1200000 min ~ #%#parent GAUGE type normal graph_data_size 2860000 max cpu14,1000,* cdef cpu14 #%#name cpu14 CPU 10 label 1200000 min ~ #%#parent GAUGE type , update_rate cpu10 #%#name normal graph_data_size 2860000 max cpu10,1000,* cdef cpu10 , update_rate ~ #%#parent GAUGE type 1200000 min CPU 17 label cpu17,1000,* cdef normal graph_data_size 2860000 max cpu17 #%#name cpu17 , update_rate ~ #%#parent GAUGE type 1200000 min CPU 8 label cpu8,1000,* cdef 2860000 max normal graph_data_size cpu8 #%#name cpu8 ~ #%#parent GAUGE type CPU 12 label 1200000 min , update_rate cpu12 #%#name cpu12,1000,* cdef 2860000 max normal graph_data_size cpu12 ~ #%#parent GAUGE type 1200000 min CPU 11 label , update_rate cpu11 #%#name cpu11,1000,* cdef 2860000 max normal graph_data_size cpu11 --base 1000 graph_args cpu22,1000,* cdef 2860000 max normal graph_data_size cpu22 #%#name , update_rate GAUGE type ~ #%#parent CPU 22 label 1200000 min cpu22 GAUGE type ~ #%#parent CPU 21 label 1200000 min , update_rate cpu21 #%#name cpu21,1000,* cdef normal graph_data_size 2860000 max cpu21 GAUGE type ~ #%#parent CPU 0 label 1200000 min , update_rate cpu0 #%#name cpu0,1000,* cdef 2860000 max normal graph_data_size cpu0 cpu9,1000,* cdef 2860000 max normal graph_data_size cpu9 #%#name , update_rate ~ #%#parent GAUGE type CPU 9 label 1200000 min cpu9 cpuspeed .rcvd trans rcvd trans rxdrop txdrop collisions graph_order if_err_eth0 #%#name eth0 errors graph_title bThis graph shows the amount of errors, packet drops, and collisions on the eth0 network interface. graph_info rxdrop #%#name no graph normal graph_data_size COUNTER type � #%#parent drops label , update_rate rxdrop 1 warning normal graph_data_size trans #%#name rcvd negative , update_rate COUNTER type � #%#parent errors label trans , update_rate COUNTER type � #%#parent collisions label normal graph_data_size collisions #%#name collisions --base 1000 graph_args ,packets in (-) / out (+) per ${graph_period} graph_vlabel network graph_category drops label � #%#parent COUNTER type , update_rate rxdrop negative txdrop #%#name normal graph_data_size txdrop , update_rate � #%#parent COUNTER type errors label 1 warning no graph normal graph_data_size rcvd #%#name rcvd #%#parent if_err_eth0 processes graph_category 5This graph shows number of processes at each priority graph_info Number of processes graph_vlabel --base 1000 -l 0 graph_args #%#parent normal graph_data_size XThe number of processes that have pages locked into memory (for real-time and custom IO) info locked #%#name , update_rate STACK draw � #%#parent locked in memory label locked , update_rate low priority label � #%#parent AREA draw normal graph_data_size low #%#name ,The number of low-priority processes (tasks) info low normal graph_data_size high #%#name -The number of high-priority processes (tasks) info , update_rate high priority label STACK draw � #%#parent high low high locked high low locked graph_order Processes priority graph_title proc_pri #%#name proc_pri disk graph_category *Bytes/${graph_period} read (-) / write (+) graph_vlabel --base 1024 graph_args #%#parent � #%#parent GAUGE type LINE1 draw 0 min loop0 label , update_rate loop0_rdbytes #%#name no graph normal graph_data_size loop0_rdbytes sda_wrbytes #%#name normal graph_data_size sda label 0 min � #%#parent LINE1 draw GAUGE type , update_rate sda_rdbytes negative sda_wrbytes , update_rate 0 min sda label LINE1 draw GAUGE type � #%#parent normal graph_data_size no graph sda_rdbytes #%#name sda_rdbytes �This graph shows averaged throughput for the given disk in bytes. Higher throughput is usualy linked with higher service time/latency (separate graph). The graph base is 1024 yeilding Kibi- and Mebi-bytes. graph_info � #%#parent normal graph_data_size wrbytes #%#name , update_rate rdbytes negative 0 min Bytes label GAUGE type LINE1 draw #%#parent wrbytes 'Pr ${graph_period} read (-) / write (+) graph_vlabel xThis graph shows disk throughput in bytes pr ${graph_period}. The graph base is 1024 so KB is for Kibi bytes and so on. graph_info --base 1024 graph_args disk graph_category Disk throughput for /dev/loop0 graph_title normal graph_data_size no graph rdbytes #%#name , update_rate invisible label 0 min GAUGE type LINE1 draw #%#parent rdbytes loop0 #%#name rdbytes wrbytes graph_order loop0 400 graph_width 3loop0_rdbytes loop0_wrbytes sda_rdbytes sda_wrbytes graph_order Throughput per device graph_title � #%#parent disk graph_category --base 1024 graph_args 8 #%#parent GAUGE type LINE1 draw Bytes label 0 min rdbytes negative , update_rate wrbytes #%#name normal graph_data_size wrbytes xThis graph shows disk throughput in bytes pr ${graph_period}. The graph base is 1024 so KB is for Kibi bytes and so on. graph_info 'Pr ${graph_period} read (-) / write (+) graph_vlabel rdbytes #%#name normal graph_data_size no graph 0 min invisible label 8 #%#parent GAUGE type LINE1 draw , update_rate rdbytes sda #%#name Disk throughput for /dev/sda graph_title rdbytes wrbytes graph_order sda loop0_wrbytes #%#name normal graph_data_size GAUGE type LINE1 draw � #%#parent 0 min loop0 label loop0_rdbytes negative , update_rate loop0_wrbytes diskstats_throughput #%#name diskstats_throughput Average IO Wait (seconds) graph_vlabel �This graph shows average waiting time/latency for different categories of disk operations. The times that include the queue times indicate how busy your system is. If the waiting time hits 1 second then your I/O system is 100% busy. graph_info !svctm avgwait avgrdwait avgwrwait graph_order normal graph_data_size 0:3 warning avgrdwait #%#name ZAverage wait time for a read I/O from request start to finish (includes queue times et al) info , update_rate 0 min Read IO Wait time label GAUGE type LINE1 draw g #%#parent avgrdwait Average latency for /dev/loop0 graph_title loop0 #%#name disk graph_category seconds graph_vlabel --base 1000 --logarithmic graph_args d #%#parent , update_rate 0 min Write IO Wait time label g #%#parent GAUGE type LINE1 draw normal graph_data_size 0:3 warning avgwrwait #%#name [Average wait time for a write I/O from request start to finish (includes queue times et al) info avgwrwait , update_rate LINE1 draw GAUGE type g #%#parent 0 min IO Wait time label normal graph_data_size VAverage wait time for an I/O from request start to finish (includes queue times et al) info avgwait #%#name avgwait {Average time an I/O takes on the block device not including any queue times, just the round trip time for the disk request. info svctm #%#name normal graph_data_size g #%#parent GAUGE type LINE1 draw Device IO time label 0 min , update_rate svctm loop0 --base 1000 graph_args disk graph_category loop0_avgwait #%#name $Average wait time for an I/O request info normal graph_data_size loop0 label 0 min LINE1 draw GAUGE type d #%#parent , update_rate loop0_avgwait #%#parent loop0_avgwait sda_avgwait graph_order 400 graph_width normal graph_data_size $Average wait time for an I/O request info sda_avgwait #%#name , update_rate d #%#parent GAUGE type LINE1 draw 0 min sda label sda_avgwait Disk latency per device graph_title 0:3 warning normal graph_data_size [Average wait time for a write I/O from request start to finish (includes queue times et al) info avgwrwait #%#name , update_rate � #%#parent GAUGE type LINE1 draw Write IO Wait time label 0 min avgwrwait d #%#parent seconds graph_vlabel --base 1000 --logarithmic graph_args disk graph_category � #%#parent GAUGE type LINE1 draw 0 min Device IO time label , update_rate {Average time an I/O takes on the block device not including any queue times, just the round trip time for the disk request. info svctm #%#name normal graph_data_size svctm normal graph_data_size avgwait #%#name VAverage wait time for an I/O from request start to finish (includes queue times et al) info , update_rate 0 min IO Wait time label LINE1 draw GAUGE type � #%#parent avgwait �This graph shows average waiting time/latency for different categories of disk operations. The times that include the queue times indicate how busy your system is. If the waiting time hits 1 second then your I/O system is 100% busy. graph_info Average latency for /dev/sda graph_title sda #%#name normal graph_data_size 0:3 warning avgrdwait #%#name ZAverage wait time for a read I/O from request start to finish (includes queue times et al) info , update_rate 0 min Read IO Wait time label LINE1 draw GAUGE type � #%#parent avgrdwait !svctm avgwait avgrdwait avgwrwait graph_order sda diskstats_latency #%#name diskstats_latency nc-ph-1432-21.okaminime.com #%#name established graph_order , update_rate established label � #%#parent GAUGE type normal graph_data_size established #%#name )The number of currently open connections. info established netstat_established #%#name Netstat, established only graph_title --lower-limit 0 graph_args TCP connections graph_vlabel IThis graph shows the TCP activity of all the network interfaces combined. graph_info network graph_category second graph_period #%#parent netstat_established �Interrupts are events that alter sequence of instructions executed by a processor. They can come from either hardware (exceptions, NMI, IRQ) or software. info intr #%#name normal graph_data_size DERIVE type #%#parent 0 min interrupts label , update_rate intr #%#parent system graph_category --base 1000 -l 0 graph_args xThis graph shows the number of interrupts and context switches on the system. These are typically high on a busy system. graph_info , update_rate #%#parent DERIVE type 0 min context switches label normal graph_data_size �A context switch occurs when a multitasking operatings system suspends the currently running process, and starts executing another. info ctx #%#name ctx +interrupts & ctx switches / ${graph_period} graph_vlabel interrupts #%#name Interrupts and context switches graph_title intr ctx graph_order interrupts nc-ph-1432-21.okaminime.com #%#parent okaminime.com
Back